/challenges-projects/design-challenges/1-meter-of-pi/b/blog/posts/envidrawer-9---3d-modelling-and-printingPrevious blogsDescription #1 - Introduction, the plan and materials preparation In this blog post we describe the project&#39;s main concept and some initial high-level design of it. #2 - Materials and casing assembly Our journey with selecting proper materien-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/1-meter-of-pi/b/blog/posts/envidrawer-9---3d-modelling-and-printingTue, 05 Jan 2021 16:51:36 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:979ab283-cfed-4f9d-874e-e1f6fb952dd2johndob0<p>lot of information in one article, still it is concise and in very detailed way show how to and why, for example - you write about simple clip but in a such clear way with additional video that it gives also insight into your way of thinking. the WHY is something used is quite often omnited in such descriptions, so many articles are &#39;What&#39; oriented with some &quot;how to&quot;. Here you not only give us the What, but also How to and in my opinion - most important &#39;why&#39; you are doing what you are doing. thx</p><img src="https://community.element14.com/aggbug?PostID=10334&AppID=269&AppType=Weblog&ContentType=0" width="1" height="1">