Blog-3 Interfacing more sensors over MQTT/challenges-projects/design-challenges/1-meter-of-pi/b/blog/posts/blog-3-interfacing-more-sensors-over-mqttIn my last blog, I explained the working of both the Hats connected with pi using the Pico Hat Hacker. There is only one BME temperature/Humidity sensor is connected with this kind of connection.My idea was to have more sensors at different places ofen-USTelligent Community 12RE: Blog-3 Interfacing more sensors over MQTThttps://community.element14.com/challenges-projects/design-challenges/1-meter-of-pi/b/blog/posts/blog-3-interfacing-more-sensors-over-mqttMon, 14 Dec 2020 15:55:54 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:8c5391c5-be0f-45ff-90f3-ed336564045dskruglewicz1<p>I&#39;m interested in experimenting with MQTT. I will follow your Blogs.</p><p>One question... Did you Solder the hacker side of the header wires that connect to the Enviro</p><p>Hat? </p><img src="https://community.element14.com/aggbug?PostID=10482&AppID=269&AppType=Weblog&ContentType=0" width="1" height="1">