Blog

Winners - At The Core Design Challenge

2023-05-24T13:23:58Z

Challengers are tasked with pushing the limits newly unleashed M0 Dual Core on the PSoC 62S4 with Infineon’s ModusToolbox Platform. At The Core Design Challenge About this Challenge | Dates | The Judges | The Kit...(read more)

BLOG#4-Testing - Get to the Cores

2023-05-09T18:17:16Z

This is the 4th blog in a series of 5 blogs for the At The Core Design Challenge. The blog post, describes the Testing that I did to debug and unit test subsystems used in the implementation Here is my functional design...(read more)

Blog#2--Design - Get to the Cores

2023-05-09T18:02:00Z

This is the 2nd blog in a series of 5 blogs for the At The Core Design Challenge. It describes in more detail, my idea and describes the Functional and Technical designs that I will use to implement my idea. Since the PSoC6 kit does not con...(read more)

BLOG#5-Implementation and Challenge Conclusion - Get to the Cores

2023-05-09T15:55:00Z

This is the my final blog in a series of 5 blogs for the At The Core Design Challenge. It will describe my finished design for my idea that I presented in my 1st blog post. Describes how I implemented my idea on the PSo...(read more)

Blog#1--Introduction - Get to the Cores - Push the limits of ModusToolbox 3.0 multi-core Embedded Firmware Development

2023-05-09T15:24:00Z

Infineon has launched a design challenge that invites challengers to push the limits of the newly released PSoC 62 dual-core microcontroller with the ModusToolbox 3.0 software development platform. The challenge aims to encourage participants t...(read more)

Blog#3- Migrating an example MTB 2.x to version 3.x - Get to the Cores

2023-05-09T13:41:00Z

This is the 3rd blog in a series of 5 blogs for the At The Core Design Challenge. This blog post describes my notes on my migration of the the GitHub - Infineon/mtb-example-psoc6-dual-cpu-ipc-pipes on the Infineon&nbsp...(read more)

Building an Adaptive Brightness Feature to Protect Your Eyes from Strain and Fatigue: Blog 04: Implementing Code on PSoCTm 62S4 pioneer kit (CY8CKIT-062S4)

2023-05-06T14:06:11Z

Introduction To begin with, we need to design the software that will control the screen brightness based on the room light level. The first step in this process is to measure the ambient light level. The PSoC 62S4 kit comes with a built-in ambi...(read more)

Alphabet Learning Toy for Kids - Blog#8: Controlling the CM4 driven Display with CM0+ sensed Capsense Button

2023-05-06T08:11:59Z

After publishing my last blog (blog #7) on 2 May I was trying to interface SD card with PSoC 62S4 device. For last three days I have spent more than 25 (twenty five) hours to successfully store and read image files from an SD card. First I tried with...(read more)

Tennis Picker@The Core#5 Picking Tennis via Dual-Core IPC

2023-05-06T02:17:26Z

Picking Tennis via Dual-Core IPC Table of Contents Picking Tennis via Dual-Core IPC 1 Present Build 2 IPC control with Sharedmemory 3 Control Motor in CM0+ 4 Machine Learning in CM4 5 Summary 1 Present Build This is the draft ...(read more)

"ATCDC: Digimorf, SEGA SG-1000 Emulator on PSoC62S4 Pioneer kit, everything unveiled!

2023-05-05T15:05:59Z

SEGA SG-1000 Emulator on PSoC62S4 Pioneer kit Hi everyone! Here we are at the conclusion of this adventure in the world of Infineon with my project for this challenge. In these two months, I have tried to share all the salient steps in the creation o...(read more)

AtTheCore: Blog #5 - Bringing altogether, Multi-Core deployment and Application

2023-05-04T22:14:29Z

Table of Contents Introduction Linking CM0+ and CM4 tasks Testing both the Cores Simultaneously IPC piping and exchanging messages for motor control CM0+ side CM4 side Comparing % Memory Usage CM4 CM0+ Code Future Work References Also Read ...(read more)

Neonatal Incubator Monitoring System - Demo & Wrap up #5

2023-05-04T21:25:45Z

Welcome to blog 5 of Neonatal Incubator Monitoring System. Up until now, we have explored how to interface various sensors with the PSoC 62S4 pioneer kit, including the Ambient Light & Temperature sensor, Heart Rate sensor, and how to interf...(read more)

Neonatal Incubator Monitoring System - Dashboard #4

2023-05-04T20:11:19Z

Welcome to blog 4 of Neonatal Incubator Monitoring System. In this tutorial, we will learn how to display serial data on a Blynk dashboard using the ESP32. We'll be using the Blynk IoT platform, which allows us to create custom dashboards and s...(read more)

Neonatal Incubator Monitoring System - Sensors Interface #3

2023-05-04T09:05:47Z

Welcome to blog 3 of Neonatal Incubator Monitoring System. In this blog, we will learn how to interface the sensors with the PSoC 62S4 pioneer kit and write a simple interface example program for Ambient Light & Temperature, Heart ...(read more)

Muscle Health Diagnosis using sEMG sensor and PSoC 62S4 Microcontroller

2023-05-04T05:07:03Z

Background Electromyography, as the name suggests, it's study of Electric Muscle Graph. It is electrophysiological study of the neuromuscular system. Now, where are these signals generated from? Our brain controls muscles. There are motor neurons...(read more)