Blog

Winners - At The Core Design Challenge

e14phil — Wed, 24 May 2023 13:23:58 GMT

Challengers are tasked with pushing the limits newly unleashed M0 Dual Core on the PSoC 62S4 with Infineon’s ModusToolbox Platform. At The Core Design Challenge About this Challenge | Dates | The Judges | The Kit...(read more)

BLOG#4-Testing - Get to the Cores

skruglewicz — Tue, 09 May 2023 18:17:16 GMT

This is the 4th blog in a series of 5 blogs for the At The Core Design Challenge. The blog post, describes the Testing that I did to debug and unit test subsystems used in the implementation Here is my functional design...(read more)

Blog#2--Design - Get to the Cores

skruglewicz — Tue, 09 May 2023 18:02:00 GMT

This is the 2nd blog in a series of 5 blogs for the At The Core Design Challenge. It describes in more detail, my idea and describes the Functional and Technical designs that I will use to implement my idea. Since the PSoC6 kit does not con...(read more)

BLOG#5-Implementation and Challenge Conclusion - Get to the Cores

skruglewicz — Tue, 09 May 2023 15:55:00 GMT

This is the my final blog in a series of 5 blogs for the At The Core Design Challenge. It will describe my finished design for my idea that I presented in my 1st blog post. Describes how I implemented my idea on the PSo...(read more)

Blog#1--Introduction - Get to the Cores - Push the limits of ModusToolbox 3.0 multi-core Embedded Firmware Development

skruglewicz — Tue, 09 May 2023 15:24:00 GMT

Infineon has launched a design challenge that invites challengers to push the limits of the newly released PSoC 62 dual-core microcontroller with the ModusToolbox 3.0 software development platform. The challenge aims to encourage participants t...(read more)

Blog#3- Migrating an example MTB 2.x to version 3.x - Get to the Cores

skruglewicz — Tue, 09 May 2023 13:41:00 GMT

This is the 3rd blog in a series of 5 blogs for the At The Core Design Challenge. This blog post describes my notes on my migration of the the GitHub - Infineon/mtb-example-psoc6-dual-cpu-ipc-pipes on the Infineon&nbsp...(read more)

Building an Adaptive Brightness Feature to Protect Your Eyes from Strain and Fatigue: Blog 04: Implementing Code on PSoCTm 62S4 pioneer kit (CY8CKIT-062S4)

sandeepdwivedi17 — Sat, 06 May 2023 14:06:11 GMT

Introduction To begin with, we need to design the software that will control the screen brightness based on the room light level. The first step in this process is to measure the ambient light level. The PSoC 62S4 kit comes with a built-in ambi...(read more)

Alphabet Learning Toy for Kids - Blog#8: Controlling the CM4 driven Display with CM0+ sensed Capsense Button

taifur — Sat, 06 May 2023 08:11:59 GMT

After publishing my last blog (blog #7) on 2 May I was trying to interface SD card with PSoC 62S4 device. For last three days I have spent more than 25 (twenty five) hours to successfully store and read image files from an SD card. First I tried with...(read more)

Tennis Picker@The Core#5 Picking Tennis via Dual-Core IPC

fyaocn — Sat, 06 May 2023 02:17:26 GMT

Picking Tennis via Dual-Core IPC Table of Contents Picking Tennis via Dual-Core IPC 1 Present Build 2 IPC control with Sharedmemory 3 Control Motor in CM0+ 4 Machine Learning in CM4 5 Summary 1 Present Build This is the draft ...(read more)

"ATCDC: Digimorf, SEGA SG-1000 Emulator on PSoC62S4 Pioneer kit, everything unveiled!

Digimorf — Fri, 05 May 2023 15:05:59 GMT

SEGA SG-1000 Emulator on PSoC62S4 Pioneer kit Hi everyone! Here we are at the conclusion of this adventure in the world of Infineon with my project for this challenge. In these two months, I have tried to share all the salient steps in the creation o...(read more)

AtTheCore: Blog #5 - Bringing altogether, Multi-Core deployment and Application

navadeepganeshu — Thu, 04 May 2023 22:14:29 GMT

Table of Contents Introduction Linking CM0+ and CM4 tasks Testing both the Cores Simultaneously IPC piping and exchanging messages for motor control CM0+ side CM4 side Comparing % Memory Usage CM4 CM0+ Code Future Work References Also Read ...(read more)

Neonatal Incubator Monitoring System - Demo & Wrap up #5

rahulkhanna — Thu, 04 May 2023 21:25:45 GMT

Welcome to blog 5 of Neonatal Incubator Monitoring System. Up until now, we have explored how to interface various sensors with the PSoC 62S4 pioneer kit, including the Ambient Light & Temperature sensor, Heart Rate sensor, and how to interf...(read more)

Neonatal Incubator Monitoring System - Dashboard #4

rahulkhanna — Thu, 04 May 2023 20:11:19 GMT

Welcome to blog 4 of Neonatal Incubator Monitoring System. In this tutorial, we will learn how to display serial data on a Blynk dashboard using the ESP32. We'll be using the Blynk IoT platform, which allows us to create custom dashboards and s...(read more)

Neonatal Incubator Monitoring System - Sensors Interface #3

rahulkhanna — Thu, 04 May 2023 09:05:47 GMT

Welcome to blog 3 of Neonatal Incubator Monitoring System. In this blog, we will learn how to interface the sensors with the PSoC 62S4 pioneer kit and write a simple interface example program for Ambient Light & Temperature, Heart ...(read more)

Muscle Health Diagnosis using sEMG sensor and PSoC 62S4 Microcontroller

KR_Mahadevan — Thu, 04 May 2023 05:07:03 GMT

Background Electromyography, as the name suggests, it's study of Electric Muscle Graph. It is electrophysiological study of the neuromuscular system. Now, where are these signals generated from? Our brain controls muscles. There are motor neurons...(read more)