/challenges-projects/design-challenges/connected-cloud-challenge-with-cypress-and-aws-iot/b/blog/posts/coin-box-robot-with-aws---10This is the final creation*this is a placeholder that i intend to update further* SummaryI keep having DAPLink error with the board. Please look at my blog #3 on the details another problem is the forever load...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/connected-cloud-challenge-with-cypress-and-aws-iot/b/blog/posts/coin-box-robot-with-aws---10Wed, 10 Jul 2024 01:21:21 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:00aa0d30-4269-435c-8cbb-9c6d5f45a1b1roduceparallel0<p>I&#39;m having trouble getting my servo to work the way I want it to. After reviewing my code, I discovered that the likely cause of the issue is that the tcpwm1&#39;s compare value is continually changing while I&#39;m continuously monitoring the button&#39;s GPIO input pin state.</p><img src="https://community.element14.com/aggbug?PostID=9292&AppID=253&AppType=Weblog&ContentType=0" width="1" height="1">