Next Road Block

RE: Next Road Block

Workshopshed — Thu, 14 May 2015 05:44:04 GMT

Looking at the code for i2cdetect it only does 7 bit addresses. It should be possible to tweek that for 10 bit addresses.

Alternatively you could look at the code libraries created for the Arduino and swap in the relavent low level commands.

shabaz — Thu, 14 May 2015 00:03:40 GMT

Hi!

You can split it up so that part of the address is sent as the first data byte. Basically, it still all obeys the I2C standard.

clem57 — Wed, 13 May 2015 23:49:34 GMT

Why a problem? If you see 111110xx or F8 or higher, you probably have a 10 bit address. All 7 bit addresses are in the rang up to F7.

Clem