/challenges-projects/design-challenges/energy-harvesting/b/blog/posts/writing-code-for-the-efm32While the glue for the Peltier module is curing, I&#39;ll start writing some code for the EFM32. The target is of course to make the complete solution low power, so I&#39;ll start by looking how the demo loaded on the board was programmed. Turn it off ...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/energy-harvesting/b/blog/posts/writing-code-for-the-efm32Tue, 21 May 2013 04:34:13 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:823bda59-28f2-425a-a338-6e715d142433COMPACT0<p>Hi Victor,</p><p>Have a look at my articles on EFM32.</p><p>The originally loaded Thermometer application is easily reloaded using Simplicity Studio, via Examples, EFM32_STK3700, inttemp, Source.</p><p>For me this opened up IAR and loaded up the application ready to &quot;Download and Debug&quot;.</p><p>&nbsp;</p><p>Cheers</p><p>Very Compact</p><img src="https://community.element14.com/aggbug?PostID=15547&AppID=106&AppType=Weblog&ContentType=0" width="1" height="1">