A Very Compact Guide to Energy Harvesting - Part 012

A Very Compact Guide to Energy Harvesting - Part 012/challenges-projects/design-challenges/energy-harvesting/b/blog/posts/a-very-compact-guide-to-energy-harvesting---part-012Just Milling about for a Tinny!I've outline milled out a PCB for the LED Driver.Here is the result. I then manually weeded out the unwanted copper with a scapel blade.After this I then decided to plate the copper and make it silvery. &nbsp...en-USTelligent Community 12RE: A Very Compact Guide to Energy Harvesting - Part 012https://community.element14.com/challenges-projects/design-challenges/energy-harvesting/b/blog/posts/a-very-compact-guide-to-energy-harvesting---part-012Thu, 16 May 2013 19:45:43 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:fa81d55e-ce58-4ced-bb0f-1950a491011cDAB1<p>Hi Monte,</p><p> </p><p>Have you considered using a CNC milling machine to make the board?</p><p> </p><p>If you did this one by hand, I admire your technique.  That is very good craftsmanship.</p><p> </p><p>Thanks</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=15847&AppID=106&AppType=Weblog&ContentType=0" width="1" height="1">