/challenges-projects/design-challenges/experimenting-with-current-sense-amplifier/b/challenge-blog/posts/blog-14-experimenting-with-overvoltage-detectionHello everyone. After reading last blog posts form other challengers, I felt some confusing with 6-bit values used when configuring overvoltage, undervoltage and overcurrent detection and accuracy of this detection. In fact all of this things are menen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/experimenting-with-current-sense-amplifier/b/challenge-blog/posts/blog-14-experimenting-with-overvoltage-detectionThu, 09 Jun 2022 02:55:16 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:fb5bb08b-9308-485a-a1c7-19dc518d735aaspork421<p>This is a nice closed-loop test. I need to play with me sensor some more and simplify code to see if I can get similar results. I was setting the alert level then running the power supply up and down but could never get the alerts.</p><img src="https://community.element14.com/aggbug?PostID=23767&AppID=364&AppType=Weblog&ContentType=0" width="1" height="1">