/challenges-projects/design-challenges/experimenting-with-extreme-environments/b/blog/posts/blog-4-implementation-of-electronic-parts-projectThe goal of this blog is to detail the construction of the electronic components that will be contained within a Hammond Manufacturing enclosure. The intention of this is to evaluate the impact of the enclosure&#39;s environment on the electronics. As paen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/experimenting-with-extreme-environments/b/blog/posts/blog-4-implementation-of-electronic-parts-projectSun, 12 May 2024 19:29:02 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:1d485074-238b-4e20-9768-682dfeb5cb9dDAB1<p>Very good post.</p><img src="https://community.element14.com/aggbug?PostID=27952&AppID=437&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/experimenting-with-extreme-environments/b/blog/posts/blog-4-implementation-of-electronic-parts-projectFri, 10 May 2024 14:51:40 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:1d485074-238b-4e20-9768-682dfeb5cb9ddougw1<p>The CM4IO datasheet indicates you can run from 5V on J20 but they recommend removing an inductor if you do....</p> <p>&quot;If you want to supply an external +5V supply to the board, e.g. via J20 or via PoE J9, then we recommend that L5 be removed. Removing L5 will prevent the on-board +5V and +3.3V supplies from starting up and +5V coming out of the DC jack socket (J19).&quot;</p><img src="https://community.element14.com/aggbug?PostID=27952&AppID=437&AppType=Weblog&ContentType=0" width="1" height="1">