/challenges-projects/design-challenges/experimenting-with-gesture-sensors/b/challenge-blog/posts/blog-2-unboxing-and-powering-max25405-evaluation-kitHello everyone. Last week I received my MAX25405 Evaluation Kit which we use as part of Experimenting with Gesture Sensors Design Challenge. Because It is very advanced evaluation kit I will describe my first thoughts about it in multiple blog posts.en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/experimenting-with-gesture-sensors/b/challenge-blog/posts/blog-2-unboxing-and-powering-max25405-evaluation-kitSun, 16 Oct 2022 18:31:51 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:226edb8d-465c-4054-9b62-6a251976980aDAB1<p>Good engineering fix.</p><img src="https://community.element14.com/aggbug?PostID=24580&AppID=387&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/experimenting-with-gesture-sensors/b/challenge-blog/posts/blog-2-unboxing-and-powering-max25405-evaluation-kitSun, 16 Oct 2022 14:13:57 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:226edb8d-465c-4054-9b62-6a251976980aBigG2<p>Yes, I too am rather surprised that the shield schematic is not provided openly as it is surely needed. What I was not sure of is whether you could safely use 5V as the spec sheet for the MAX25404 say that LDO_IN Supply Voltage is MIN 2.7V and MAX 5.5V.</p> <p>So, thanks for sharing the option to use the pin headers as this will be more useful... I too couldn&#39;t use the plug so had to take another route, which requires much more care and attention [emoticon:4b473fb4671244b2a5887318abe9e44a].</p> <p><img alt=" " src="/resized-image/__size/1280x720/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-226edb8d-465c-4054-9b62-6a251976980a/20221016_5F00_150226.jpg" /></p> <p></p><img src="https://community.element14.com/aggbug?PostID=24580&AppID=387&AppType=Weblog&ContentType=0" width="1" height="1">