/challenges-projects/design-challenges/experimenting-with-inductors/b/blog/posts/integrated-design-of-buck-boost-regulator-2... continuing the previous Experiment, meanwhile we have designed the PCB through which we will be testing the functionality of our Buck-Boost Regulator design. We have used high density LiPo-pack as the primary power source for our entire circ...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/experimenting-with-inductors/b/blog/posts/integrated-design-of-buck-boost-regulator-2Sun, 23 Feb 2020 23:00:49 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:618c95b3-0204-4443-b855-332f748e4742jc20480<p>Thanks for an interesting blog to read. It&#39;s neat seeing you doing your own design.</p><p>&nbsp;</p><p>And now I understand what you were doing. I was a bit confused in the first blog by your calling it &#39;buck-boost&#39;. I think I&#39;d call this one a &#39;buck-or-boost&#39; converter, rather than a &#39;buck-boost&#39;, not that it particularly matters [there seems to be quite a lot of confusion generally as to what it should be called, anyhow].</p><p>&nbsp;</p><p>Have you been able to test to see what effect a step change of the load on the output has? It would be good to see some waveforms if you have access to an oscilloscope. That would give anyone who wanted to build one confidence that your control code was doing its job.</p><img src="https://community.element14.com/aggbug?PostID=8721&AppID=245&AppType=Weblog&ContentType=0" width="1" height="1">