1# Introduction about myself and Experiment plan/challenges-projects/design-challenges/experimenting-with-magnetic-components/b/blog/posts/1-introduction-about-myself-and-experiment-planIntroduce about myself: I am working on IoT devices and power devices in various projects for Agriculture, medical, industrial, households, etc. Has experience in Software programming like C, C++, PYTHON, MATLAB, VHDL, etc on Hardware like Ardui...en-USTelligent Community 12RE: 1# Introduction about myself and Experiment planhttps://community.element14.com/challenges-projects/design-challenges/experimenting-with-magnetic-components/b/blog/posts/1-introduction-about-myself-and-experiment-planThu, 14 Oct 2021 20:09:33 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:e40a5520-ab44-4102-9737-7123463548e5Jan Cumps0<blockquote class="jive-quote"><p> If the variable components were given in this challenge then they would have be more better for everyone whose is participating in this current challenge.</p></blockquote><p>Were you expecting different components than <a class="jive-link-wiki-small" href="/challenges-projects/design-challenges/experimenting-with-magnetic-components/w/documents/23177/experimenting-with-magnetic-components-about-the-competition#kit">the kit listed here</a>? Variable inductors?</p><p>A few of them, you might be able to remove the housing carefully and change the winding ratio by hand. But that will require a steady hand.</p><img src="https://community.element14.com/aggbug?PostID=22211&AppID=339&AppType=Weblog&ContentType=0" width="1" height="1">