Member projects for Experimenting with Single Pair Ethernet https://community.element14.com/challenges-projects/design-challenges/experimenting-with-single-pair-ethernet/b/projects/atomTelligent Community (Build: 12.1.9.35025)2026-03-10T11:27:49Zhttps://community.element14.com/challenges-projects/design-challenges/experimenting-with-single-pair-ethernet/b/projects/posts/yolov3-object-detection-over-10base-t1l-spe2026-04-10T09:51:24Z2026-04-10T09:51:24ZIntroduction I have been wanting to do vision based projects for a while now, but there was one problem that kept getting in the way. The dev board needs to sit in a remote area, which in my case is quite far from the actual field where the camera ne...(<a href="https://community.element14.com/challenges-projects/design-challenges/experimenting-with-single-pair-ethernet/b/projects/posts/yolov3-object-detection-over-10base-t1l-spe">read more</a>)<img src="https://community.element14.com/aggbug?PostID=29663&AppID=473&AppType=Weblog&ContentType=0" width="1" height="1">veluv01https://community.element14.com/members/veluv01https://community.element14.com/challenges-projects/design-challenges/experimenting-with-single-pair-ethernet/b/projects/posts/advanced-dashcam-and-monitoring-system2026-04-04T00:36:40Z2026-04-04T00:36:40ZProject Introduction The overall goal of this project is to build an always on monitoring and dashcam system for a car. The primary functionality is to stream the camera feed in real-time to a remote server, even when the car is parked. This immediat...(<a href="https://community.element14.com/challenges-projects/design-challenges/experimenting-with-single-pair-ethernet/b/projects/posts/advanced-dashcam-and-monitoring-system">read more</a>)<img src="https://community.element14.com/aggbug?PostID=29648&AppID=473&AppType=Weblog&ContentType=0" width="1" height="1">vmatehttps://community.element14.com/members/greenmatehttps://community.element14.com/challenges-projects/design-challenges/experimenting-with-single-pair-ethernet/b/projects/posts/subject-placeholder2026-04-03T00:59:58Z2026-04-03T00:59:58ZIntro Experimenting with Single Pair Ethernet Design Challenge is a Molex sponsored contest involving conducting research of Single Pair Ethernet - one of newer physical layers of 802.3 Ethernet. This layer, which is utilizing single twisted conducto...(<a href="https://community.element14.com/challenges-projects/design-challenges/experimenting-with-single-pair-ethernet/b/projects/posts/subject-placeholder">read more</a>)<img src="https://community.element14.com/aggbug?PostID=29572&AppID=473&AppType=Weblog&ContentType=0" width="1" height="1">JWxhttps://community.element14.com/members/jwx