/challenges-projects/design-challenges/experimenting-with-thermal-switches/b/challenge-blog/posts/blog-5-testing-the-system-using-waterWe have build a lot of parts for the project. Like the liquid heating element, temperature switch etc. Before assembling the whole system. We feel that each parts of the system should be tested. Video 1 shows the working system of the parts in water.en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/experimenting-with-thermal-switches/b/challenge-blog/posts/blog-5-testing-the-system-using-waterThu, 24 Mar 2022 18:57:03 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:5d0cdcc7-ffc5-40e1-bddf-bef3bdfa4c9cmanojroy1230<p>Hot glue only seals the end not the entire switch. It have been checked the hot glue is not affecting the thermal reed switch.</p><img src="https://community.element14.com/aggbug?PostID=23274&AppID=359&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/experimenting-with-thermal-switches/b/challenge-blog/posts/blog-5-testing-the-system-using-waterThu, 24 Mar 2022 18:11:10 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:5d0cdcc7-ffc5-40e1-bddf-bef3bdfa4c9cDAB0<p>Have you verified that the hot glue does not change the thermal characteristics of the switch?</p><img src="https://community.element14.com/aggbug?PostID=23274&AppID=359&AppType=Weblog&ContentType=0" width="1" height="1">