/challenges-projects/design-challenges/experimenting-with-thermistors/b/challenge-blog/posts/blog-13-characterising-thermistors-pulling-out-overload-response-time-building-a-flow-meter-final-conclusionWith the Experimenting with Thermistors Design Challenge drawing to a close in just a few days, here comes my final blog post. In this post, I continue testing thermistors in a more destructive fashion, attempt to resolve the question of thermistor ren-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/experimenting-with-thermistors/b/challenge-blog/posts/blog-13-characterising-thermistors-pulling-out-overload-response-time-building-a-flow-meter-final-conclusionSun, 18 Sep 2022 13:08:27 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:efd5caef-e239-45ca-8e04-d26865990bd6Andrew J0<p>This has been a brilliant set of blogs, thanks for the effort.</p><img src="https://community.element14.com/aggbug?PostID=24434&AppID=377&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/experimenting-with-thermistors/b/challenge-blog/posts/blog-13-characterising-thermistors-pulling-out-overload-response-time-building-a-flow-meter-final-conclusionSat, 17 Sep 2022 18:25:19 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:efd5caef-e239-45ca-8e04-d26865990bd6DAB0<p>Great conclusion of an excellent test sequence.</p> <p>Well done.&nbsp;</p><img src="https://community.element14.com/aggbug?PostID=24434&AppID=377&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/experimenting-with-thermistors/b/challenge-blog/posts/blog-13-characterising-thermistors-pulling-out-overload-response-time-building-a-flow-meter-final-conclusionSat, 17 Sep 2022 10:50:45 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:efd5caef-e239-45ca-8e04-d26865990bd6michaelkellett1<p>Great final blog to cap a really nice and informative series !</p> <p>Thanks for all your efforts on this.</p> <p>MK</p><img src="https://community.element14.com/aggbug?PostID=24434&AppID=377&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/experimenting-with-thermistors/b/challenge-blog/posts/blog-13-characterising-thermistors-pulling-out-overload-response-time-building-a-flow-meter-final-conclusionSat, 17 Sep 2022 02:16:58 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:efd5caef-e239-45ca-8e04-d26865990bd6ntewinkel1<p>Hi&nbsp;[mention:ef601b47037147bfb9b0b4a3ab63026a:e9ed411860ed4f2ba0265705b8793d05]!</p> <p>Thank you for all of the deep investigation you did during this challenge! My experimenting only just scratched the surface (by design - my aim was a specific project use), so I thoroughly enjoyed reading your deeper dives.</p> <p>It was fun learning alongside you as well as&nbsp;from you during this challenge&nbsp;[emoticon:c4563cd7d5574777a71c318021cbbcc8]</p> <p>&gt;<span>With the </span><em>Experimenting with Thermistors Design Challenge</em><span> drawing to a close in just a few days, here comes my final blog post.</span></p> <p>Part of me wanted this challenge to keep going for a while!</p> <p>-Nico</p><img src="https://community.element14.com/aggbug?PostID=24434&AppID=377&AppType=Weblog&ContentType=0" width="1" height="1">