Blog

Experimenting with Vibration Sensors Part 2: The Journey

charlieo21 — Wed, 27 Jan 2021 16:40:48 GMT

Difficult timesYes, everyone know this, but this doesn´t have to be a stopper. I'm facing with problems to access to the laboratory with the autonomous vehicles.So, I'm going to show my progress and in the future I'll make another blog wi...(read more)

#2 The Build

souravv — Wed, 27 Jan 2021 12:07:49 GMT

The ComponentsAs promised, I received all the parts required to make my project a reality, on time. The package included a TOKIN VS-B203 high bandwidth vibration sensor, an STM32H743ZI ARM COrtex M7 microcontroller based development board in the Nucl...(read more)

Motor Vibration Analysis

neuromodulator — Wed, 27 Jan 2021 08:43:00 GMT

1. Introduction 2. Hardware Setup 3. Signal Processing 3.1 Rotation tracking 3.2 Order tracking 4 Experiments 4.1 Signal Analysis 4.2 Real-time Dashboard 5. Summary 1. Introduction Machine vibration analysis is used...(read more)

Noise and vibration analysis of automotive disk brakes | Blog#2| Project Progress

jissdeodates — Tue, 26 Jan 2021 01:29:52 GMT

Workflow The noise (acoustic sensor) and vibration (Kemet sensor) analysis module attached to the brake pedal of the vehicle or in the vicinity.Vibration and acoustic data were collected simultaneously during braking (taken at low speeds and not...(read more)

KEMET Music Pad - Play Music Anywhere (Blog2)

asokfair — Mon, 25 Jan 2021 18:33:11 GMT

Hi All, The final blog is here about my instrument "KEMET Music Pad" or "Music Surface Kit" Introduction:When you clap with hands we can hear a sound, it can be turn into music based on the variation , vibration and velocity. Its clea...(read more)

Blog2# Sample experiment with vibration sensor

swathic — Mon, 25 Jan 2021 10:16:43 GMT

I have conducted a sample experiment to measure the frequency of vibration of a defective BLDC fan using KEMET's VS vibration sensor. The video shows the measurement of vibration frequency. players.brightcove.net/.../index.html(read more)

Vibration Sensor - Wrap Up

ralphjy — Sat, 23 Jan 2021 15:46:06 GMT

Experimenting with Vibration Sensors Challenge SummaryIt has been another fun challenge. I was not able to achieve what I had proposed (TinyML model to identify people by their footstep vibrations), but as always I learned a lot working on the ...(read more)

Vibration Sensor and Exercising - What I learned and Summary - Blog #6

yosoufe — Sat, 23 Jan 2021 09:27:00 GMT

I would like to have a summary here and talk about what I have learned during this project. Before that I would like to say that I really appreciate this opportunity that is given to me by element14 and Kemet. I enjoyed and learned a lot. Thanks agai...(read more)

Vibration Sensor - Impulse Design?

ralphjy — Fri, 22 Jan 2021 19:02:37 GMT

I did not obtain sufficient data (both in quality and quantity) to construct an impulse (model), but I thought it would be worthwhile to review what I was trying to achieve by comparison to an impulse that I have successfully deployed using Edge Impu...(read more)

Vibration Sensor and Exercising - High Vibration Detection on Nucleo Board Alone (No Jetson Nano) and Telegram Bot - Blog #5

yosoufe — Fri, 22 Jan 2021 03:58:11 GMT

Introduction REMOTELY Programming and Debugging the Nucleo Board (via WiFi) Detecting Vibration on Nucleo Board alone (No Jetson Nano Anymore) Bluetooth Working End to End Prototype Working Related Links IntroductionIn the previous ...(read more)

Vibration Sensor - Evaluating the data

ralphjy — Wed, 20 Jan 2021 22:48:10 GMT

I started collecting data for my project, but I strained my back (doing something else) and I don't think I'll be doing much more project stuff for a while. I did capture a bunch of data and I thought I'd evaluate that, even though I don't think...(read more)

Experimenting with Vibration Sensors - Characterize RPM of Spinning Devices #7 (Final Conclusion)

zst123 — Wed, 20 Jan 2021 13:23:54 GMT

Final thoughts As the competition comes to a close, these are my final thoughts...I feel this sensor is well-suited for many applications such as industrial IoT and field devices. Because of its high sensitivity, I am able to sense the vibration...(read more)

Experimenting with Vibration Sensors as Predictive Maintenance Model Trainer #2

fyaocn — Wed, 20 Jan 2021 07:45:42 GMT

Kemet Vibration Sensor Experiment for Predictive Maintenance Model Trainer 1 Introduction 2 Hardware and Software 3 Unboxing and Preliminary Functional Test 4 Senaries to be tested 5 Data logging 6 Data training 7 Data Deploing with AI...(read more)

Vibration Sensor and Exercising - Setup to Measure Floor's Vibration and Threshold Alerts Logic - Blog #4

yosoufe — Mon, 18 Jan 2021 21:36:28 GMT

3D Printed Mount My Measurement Setup Developing Notification Logic Related Links 3D Printed Mount As the title of my project describes, I would like to measure the vibrations of our apartment or its floor that is caused by our ind...(read more)

Epilepsy Seizure Monitoring System - ESMS - The Project

gam3t3ch — Sun, 17 Jan 2021 23:44:24 GMT

What I intend to do is come up with a system that will detect and alert the uncommon movements in sleep, since seizures will not be tested I will focus on the most common data from visual muscle twitches and jerks, adding on possible add-ons in...(read more)