/challenges-projects/design-challenges/experimenting-with-vibration-sensors/b/blog/posts/noise-and-vibration-analysis-of-automotive-disk-brakes-blog-1-introduction-to-design-projectHi everyone, this is my first ever design challenge and I am very much excited to take part in this.About me, I am a computer science graduate student who is interested in IoT, Robotics, and embedded systems.In this blog post, I would like to give anen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/experimenting-with-vibration-sensors/b/blog/posts/noise-and-vibration-analysis-of-automotive-disk-brakes-blog-1-introduction-to-design-projectWed, 13 Jan 2021 16:41:32 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:b3170889-33a7-4a7e-a270-1788a263d3e1mcfryday0<p>Looking forward to see the results of your experiment and I think this should work when you look at the frequency domain, I keep following this ;-) Cheers, Michael</p><img src="https://community.element14.com/aggbug?PostID=10465&AppID=272&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/experimenting-with-vibration-sensors/b/blog/posts/noise-and-vibration-analysis-of-automotive-disk-brakes-blog-1-introduction-to-design-projectSat, 12 Dec 2020 18:20:27 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:b3170889-33a7-4a7e-a270-1788a263d3e114rhb0<p>A great project idea, well done. Would the finer information from the caliper/disc/pad effects be lost having travelled through the hydraulic cylinder etc and linkages to the servo? However I also wouldn&#39;t entertain fixing sensors on a public road going vehicle right down at the caliper level to gather than finer information - but inside the engine bay where the servo/ABS system is located might be good? That said, your insurance would likely be void should anything happen regardless of whether the test setup was to blame or not (insurance companies are like that !)</p><img src="https://community.element14.com/aggbug?PostID=10465&AppID=272&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/experimenting-with-vibration-sensors/b/blog/posts/noise-and-vibration-analysis-of-automotive-disk-brakes-blog-1-introduction-to-design-projectSat, 12 Dec 2020 00:54:37 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:b3170889-33a7-4a7e-a270-1788a263d3e1dwinhold0<p>Looking forward to see what results you come up with. Good luck!!</p><p>&nbsp;</p><p>Dale W</p><img src="https://community.element14.com/aggbug?PostID=10465&AppID=272&AppType=Weblog&ContentType=0" width="1" height="1">