/challenges-projects/design-challenges/experimenting-with-waterproof-connectors/b/blog/posts/monitoring-station-for-underground-cold-storage-sensors---extra-credit-blog-3Sensor design Sensor construction requirements As it was described in the first part of my project blog , I want to build a central monitoring station and several sensors installed in different enclosures, gathering data for further analysis. Using then-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/experimenting-with-waterproof-connectors/b/blog/posts/monitoring-station-for-underground-cold-storage-sensors---extra-credit-blog-3Thu, 18 May 2023 09:50:50 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:04d6b774-f542-487d-8fd1-a19c8c43120bJWx0<p>There is a schematics correction below - library part uses SOC pin numbers, not Arduino pin names, which caused some confusion.</p> <p><img alt="Schematics correction" src="/resized-image/__size/1280x720/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-04d6b774-f542-487d-8fd1-a19c8c43120b/esp8266_5F00_sensor_5F00_sch_5F00_corr.png" /></p><img src="https://community.element14.com/aggbug?PostID=25894&AppID=405&AppType=Weblog&ContentType=0" width="1" height="1">