/challenges-projects/design-challenges/experimenting-with-waterproof-connectors/b/blog/posts/e-w-c-blog-5---stress-itHello everyone! Another blog about waterproof connectors, and another tough test I might say. Until now, I have tried to see what results I get with these connectors in heavy conditions, high humidity, let&#39;s say, but I rather accelerated this processen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/experimenting-with-waterproof-connectors/b/blog/posts/e-w-c-blog-5---stress-itMon, 05 Jun 2023 14:31:05 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:b7b2913d-3bd8-4efd-a8a9-1c27c95d643drscasny1<p>Could you upload the videos so they appear on the page and people don&#39;t need to go to google drive? If you can, I&#39;d appreciate it.&nbsp;</p> <p>Randall</p><img src="https://community.element14.com/aggbug?PostID=26043&AppID=405&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/experimenting-with-waterproof-connectors/b/blog/posts/e-w-c-blog-5---stress-itSun, 28 May 2023 19:48:47 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:b7b2913d-3bd8-4efd-a8a9-1c27c95d643dJWx1<p>Good to know you have managed to seal this RJ45. Out of curiosity - can this thread be recreated using standard tools? I have modified threads in computer rails (original were imperial but I have to modify them to metric because of screw availability) but this RJ45 doesn&#39;t look like typical metal (steel or alu) to me...</p><img src="https://community.element14.com/aggbug?PostID=26043&AppID=405&AppType=Weblog&ContentType=0" width="1" height="1">