/challenges-projects/design-challenges/forget-me-not/b/blog/posts/1---enocean-sensors-and-raspberry-pi-arrivalLast night, 8/4/14, a box arrived from Element 14, it contained the following items: Raspberry Pi B+ (no microSD card)EnOcean PiFTM210U Rocker SwitchSTM332U Temperature Sensor/MonitorSTM320U Magnetic Contact Switch Needless to say I was exc...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/forget-me-not/b/blog/posts/1---enocean-sensors-and-raspberry-pi-arrivalMon, 01 Jun 2015 11:25:46 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:ee4e08ac-2452-4c45-87cc-9cca358d116fFormer Member0<p>Hello,</p><p>&nbsp;</p><p>I managed to connect my rocker switches, my tempurature sensors and my contact sensor to OpenHab</p><p>and I want to update the enocean binding to support the following profils:</p><p>&nbsp;</p><p>*EEP: <span>A5-07-01 (<span>occupancy&nbsp; sensors)</span></span></p><p>*EEP: D2.01.08 (<span>dimmers with Energy Measurement and Local Control)</span></p><p>&nbsp;</p><p>Can you help me with that?</p><p>Are there steps that I can follow to update the OpenHab EnOcean binding to be able to support a new profile?</p><p>&nbsp;</p><div>Thanks a lot!<p>&nbsp;</p></div><img src="https://community.element14.com/aggbug?PostID=18251&AppID=100&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/forget-me-not/b/blog/posts/1---enocean-sensors-and-raspberry-pi-arrivalTue, 05 Aug 2014 21:10:09 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:ee4e08ac-2452-4c45-87cc-9cca358d116fFormer Member1<p>Hi,</p><p>&nbsp;</p><p>The temperature sensor (STM332) will not work as a set-point, occupancy, or humidity sensor without additional piggyback boards. See the HSM100 for example. The hardware just is not there but the firmware supports it.</p><img src="https://community.element14.com/aggbug?PostID=18251&AppID=100&AppType=Weblog&ContentType=0" width="1" height="1">