Forget Me Not Design Challenge Week 02: The EnOcean Sensor Kit, EnOcean Pi, and Raspberry Pi Model B+ Unboxing/challenges-projects/design-challenges/forget-me-not/b/blog/posts/forget-me-not-design-challenge-week-02-the-enocean-sensor-kit-enocean-pi-and-raspberry-pi-model-b-unboxingOther blogs on this project Forget Me Not Design Challenge Week 01: The Introduction Forget Me Not Design Challenge Posting 03: The EnOcean Sensor Kit, EnOcean Pi, and Raspberry Pi Model B+ Setup, Configuration, and FHEM Operation Forget Me Not Designen-USTelligent Community 12RE: Forget Me Not Design Challenge Week 02: The EnOcean Sensor Kit, EnOcean Pi, and Raspberry Pi Model B+ Unboxinghttps://community.element14.com/challenges-projects/design-challenges/forget-me-not/b/blog/posts/forget-me-not-design-challenge-week-02-the-enocean-sensor-kit-enocean-pi-and-raspberry-pi-model-b-unboxingSun, 10 Aug 2014 19:38:40 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:e338f009-8c2e-4b7b-8a7b-e6ed75c53d4eDAB1<p>Good post with plenty of detail.</p><p>&nbsp;</p><p>Look forward to your next post.</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=18287&AppID=100&AppType=Weblog&ContentType=0" width="1" height="1">RE: Forget Me Not Design Challenge Week 02: The EnOcean Sensor Kit, EnOcean Pi, and Raspberry Pi Model B+ Unboxinghttps://community.element14.com/challenges-projects/design-challenges/forget-me-not/b/blog/posts/forget-me-not-design-challenge-week-02-the-enocean-sensor-kit-enocean-pi-and-raspberry-pi-model-b-unboxingSun, 10 Aug 2014 16:00:32 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:e338f009-8c2e-4b7b-8a7b-e6ed75c53d4emcb11<p>Thanks for sharing this.</p><p>I suspect the Temp sensor module is populated to allow the Humidity sensor module to be fitted.</p><p>&nbsp;</p><p>Identifying Pin 1 on the unit would be useful and save it being rotated 180 deg.....</p><p>&nbsp;</p><p>Mark</p><img src="https://community.element14.com/aggbug?PostID=18287&AppID=100&AppType=Weblog&ContentType=0" width="1" height="1">