/challenges-projects/design-challenges/forget-me-not/b/blog/posts/scho-addonI have designed an PCB holder for the EnOcean Sensors. This PCB would help to mount the sensors on the doors, windows and other desired locations. Thanks to EnOcean for the Additional PTM200C module, Rockers cases , STM320C enclosure and the connectoren-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/forget-me-not/b/blog/posts/scho-addonTue, 09 Sep 2014 19:26:33 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:d163a354-92c6-4a9b-a324-9ffc644f84cdFormer Member0<p>Hi There,</p><p>&nbsp;</p><p>The TCM320C does support all the modes. Make sure the correct votlage is on ADIO0 at start up and reset.</p><p>&nbsp;</p><p>To control the TCM320C from a TCM310C you will just need to emulate a Rocker switch (RPS telegrams). Simply grab the data and status and send the same thing but with the ID set to 0x00000000. This is a placeholder for the chip id.</p><img src="https://community.element14.com/aggbug?PostID=18460&AppID=100&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/forget-me-not/b/blog/posts/scho-addonTue, 26 Aug 2014 06:50:20 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:d163a354-92c6-4a9b-a324-9ffc644f84cdhlipka2<p>Where did you find the enclosures for the sensors? I was looking both as Farnell and the EnOcean website, and came up empty. Or do you have secret connection inside EnOcean?</p><img src="https://community.element14.com/aggbug?PostID=18460&AppID=100&AppType=Weblog&ContentType=0" width="1" height="1">