IOT Circus: The wireless ring master: CC3200, MQTT, MSP430s, Serial and Hacking EnOcean

RE: IOT Circus: The wireless ring master: CC3200, MQTT, MSP430s, Serial and Hacking EnOcean

ipv1 — Mon, 22 Sep 2014 08:07:37 GMT

Ravi thanks for the query.

My applolgies for the confusion.

1. The modified code is still with me. I will put it up on github once I clean it up.

2. There are three functions you need to look at... measure, measure2data and the sendDataTelegram. But I think you already know that since you already prepared a hex

3. You also need to generate configuration and startup code for EO3000 using dolphin view. I'm not sure how you did it but its a simpler way to do it.

4. There is a list of ADC inputs available and you can choose any one two or so. I used just one. You typically should not go above Vreff at input or below the vss.

5. You can power it from the sensor Vcc but not recommended by enocean. I use a single 3v coin cell.

Hope this helps.

RE: IOT Circus: The wireless ring master: CC3200, MQTT, MSP430s, Serial and Hacking EnOcean

ravi_butani — Mon, 22 Sep 2014 06:56:09 GMT

I have downloaded your attchment with this post.... compiled and burned it on STM330 now what?????

where is a prob you are talking about? [View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-878d0a7a-26f5-4021-9e42-84bbae70201a/7723.contentimage_5F00_1.png:16:16]

Which ADC channel do i choose to connect my sensor...???

Is there SWPWR awailable for sensor while Sampling....???

RE: IOT Circus: The wireless ring master: CC3200, MQTT, MSP430s, Serial and Hacking EnOcean

ipv1 — Mon, 22 Sep 2014 06:39:29 GMT

Ravi,

Good job on the post but the reason I did this post was to include the stuff you "missed out" on [View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-878d0a7a-26f5-4021-9e42-84bbae70201a/0602.contentimage_5F00_1.png:16:16] No probs.

Me being an educator will always put up more info than probably required but it's a matter of habit. Anyway I am cleaning up the code and will be uploading it up on github soon so prolly if you feel there is something you can add, you can let me know.

Will update this post at the end.

Thanks again,

RE: IOT Circus: The wireless ring master: CC3200, MQTT, MSP430s, Serial and Hacking EnOcean

bose — Mon, 22 Sep 2014 03:57:44 GMT

Great post and congratulations on the progress !!

I have been using all your instructions all this while, they are clear easy and fun to read.

I am stuck with TCM320C control binding from the OpenHAB install. Essentially once cant sent out a message from the TCM310 on the Pi using the Enocean binding rules in the OpenHAB. If you ever come across any info related to send out the messages from TCM310 please do post.

Thanks and best of luck,

Abhijit

RE: IOT Circus: The wireless ring master: CC3200, MQTT, MSP430s, Serial and Hacking EnOcean

DAB — Sun, 21 Sep 2014 20:05:19 GMT

Very good post.

Lots of detail and clearly written descriptions.

You also reminded me that I have some of the CC2500 boards laying around somewhere that I could use as a sensor sub-network.

Could be very useful.

Thanks

DAB

RE: IOT Circus: The wireless ring master: CC3200, MQTT, MSP430s, Serial and Hacking EnOcean

mcb1 — Sun, 21 Sep 2014 10:53:55 GMT

Inderpreet

Don't be selfish ... you already have one minion ..[View:/resized-image/__size/16x16/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-878d0a7a-26f5-4021-9e42-84bbae70201a/5141.contentimage_5F00_2516.png:16:16]

To change the characteristics of a module, you can upload a different version firmware.

I changed the default version to a STMSEN (I saved the firmware in the Dolphin API folder)

[View:/resized-image/__size/620x347/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-878d0a7a-26f5-4021-9e42-84bbae70201a/8360.contentimage_5F00_177259.png:620:347]

Once you have this, then you change the mode.

see EnOcean_Equipment_Profiles_EEP_V2.61_public.pdf you referenced in an earlier post.

[View:/resized-image/__size/335x97/__key/commentfiles/f7d226abd59f475c9d224a79e3f0ec07-878d0a7a-26f5-4021-9e42-84bbae70201a/2402.contentimage_5F00_177260.png:335:97]

The one above gives Movement, Power, Temperature and illuminance

It appears you want A5-12-04 (page 61), but you might need to scale it as it goes from 0 to 16383 grams.

It also gives you the ability to transmit the Battery Level.

The only thing they don't say is what goes where on the module ....

I need to do some more reading ....

I'm thinking about writing up what I've been playing with ...if I get the chance this week.

Mark