/challenges-projects/design-challenges/forget-me-not/b/blog/posts/cam-e-lot---round-14---man-vs-rpisocIn this post, I finally put my hands on the RpiSOC board to make some experiments with servos, in particular with easing functions. My purpose is to control servos speed and acceleration by sending high-level command (i.e. move to 120 degrees positioen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/forget-me-not/b/blog/posts/cam-e-lot---round-14---man-vs-rpisocThu, 09 Oct 2014 17:52:29 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:ed35837e-4302-4179-94d1-028c30836c79ipv11<p>Nice work. </p><p>In my experiments I found the concept to be able but the implementation a bit lacking. I will write a blog post on the topic soon but the full potential of the rpisoc is much more in my mind. </p><p>Think rpisoc + pifacecad + picrust + Groove</p><p>&nbsp;</p><p>Cheers,</p><p>IP</p><img src="https://community.element14.com/aggbug?PostID=18838&AppID=100&AppType=Weblog&ContentType=0" width="1" height="1">