/challenges-projects/design-challenges/forget-me-not/b/blog/posts/don-t-forget-the-windows-09---reconfigure-the-stm330-sensorverrverr was so kind to provide a nice overview video on using the EOP350 programmer. I used it yesterday to change the configuration of my STM330 sensor to also accomodate the HSM100 humidity sensor. Since I needed to put the video in pause mo...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/forget-me-not/b/blog/posts/don-t-forget-the-windows-09---reconfigure-the-stm330-sensorWed, 15 Oct 2014 14:21:16 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:f9e49882-5039-4f70-b8db-8bd2d08b6741ipv11<p>Thanks for the reply sir.</p><p>Well I see no where the reason why the temperature sensor is behaving this way. I can live with a little inaccuracy but I have no idea why this is happening. The rest is working fine. I am using the binding from a fork which allows more eeps but the other temperature sensor are working fine. This means either its a hardware fault on the stm330 or firmware issue. I flashed the firmware from the enocean website but no go. I am thus at the concluding that the hardware has been damaged somehow. I am putting it on my (ultra long) to do list and will proceed with finishing my project right now.</p><p>Thanks for the input though.</p><p>Cheers </p><p>Ip</p><img src="https://community.element14.com/aggbug?PostID=18882&AppID=100&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/forget-me-not/b/blog/posts/don-t-forget-the-windows-09---reconfigure-the-stm330-sensorWed, 15 Oct 2014 02:53:52 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:f9e49882-5039-4f70-b8db-8bd2d08b6741ipv11<p>Unfortunately I have the STMTRH firmware on there but still the output is inverted. Any ideas?</p><img src="https://community.element14.com/aggbug?PostID=18882&AppID=100&AppType=Weblog&ContentType=0" width="1" height="1">