/challenges-projects/design-challenges/hats-off/b/blog/posts/gemma-splashwear-4-doggy-me-final-3-d-printed-versions-2-3-button-end-caps-yeahHello everyone! Im back, I needed some me time to celebrate my birthday. Here are my final 3-D printed end-caps. They turned out so nice! Dave did a great job! He made 3 prototypes and It was so cool to watch them come to life.&amp;nbs...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/hats-off/b/blog/posts/gemma-splashwear-4-doggy-me-final-3-d-printed-versions-2-3-button-end-caps-yeahTue, 14 Oct 2014 18:48:46 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:1563cc5a-5bfc-4455-843a-3faa168a925fDAB1<p>Good progress.</p><p>&nbsp;</p><p>I can see uses for your ring design in other projects.</p><p>You should have a great presentation for your final build.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=18869&AppID=109&AppType=Weblog&ContentType=0" width="1" height="1">