/challenges-projects/design-challenges/hats-off/b/blog/posts/hats-off-mardi-gras---circle-layout-wiring-code-part-5I&#39;m finally at the point where I get to put all my NeoPixels into place and get them wired up. The only sensor that I will be using is the photocell. It&#39;s purpose is to detect the light levels and turn off the NeoPixel sequence, if the environment isen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/hats-off/b/blog/posts/hats-off-mardi-gras---circle-layout-wiring-code-part-5Wed, 29 Oct 2014 04:30:50 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:ed6debd0-e89b-4f35-a771-ecb464830d60e14 Contributor1<p>i am excited to see the finished product; it looks like it&#39;s going to be awesome.&nbsp; i have to say it am most excited that you gave your code.&nbsp; i hope to play with photo cell someday soon.&nbsp; Your project is really coming together; good luck!</p><p>&nbsp;</p><p>Kandy</p><img src="https://community.element14.com/aggbug?PostID=18937&AppID=109&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/hats-off/b/blog/posts/hats-off-mardi-gras---circle-layout-wiring-code-part-5Tue, 21 Oct 2014 19:09:14 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:ed6debd0-e89b-4f35-a771-ecb464830d60DAB1<p>Very good update Lori.</p><p>&nbsp;</p><p>I like the translucent covers for the neopixels.</p><p>They really disperse the LED light over a nice area.</p><p>&nbsp;</p><p>It looks like you are about ready to do the final assembly.</p><p>Should be an impressive display.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=18937&AppID=109&AppType=Weblog&ContentType=0" width="1" height="1">