Blog

Blog One – In the Air Tonight Project Start

christophesky — Mon, 14 Nov 2022 09:46:23 GMT

Blog One – In the Air Tonight Project Start Hey, Christophe here. Let me introduce you to my project entry for Summer of Sensors - In the Air Tonight challenge design competition sponsored by E14 and Renesas (thank you for picking my entry!) It...(read more)

AirVisual Node Keeps You Informed About Your Air Quality

kas.lewis — Mon, 14 Mar 2016 20:06:06 GMT

Introduction We spend so much time taking care what food we consume and how it affects our health but rarely do we stop to think about the very air that we breath. Depending on our location anything from a simple walk to just sitting at our des...(read more)

In the Air Design Challenge - The Winners

doctorcdf — Tue, 17 Mar 2015 09:52:01 GMT

The full press release can be read by clicking here.A big thank you to all who participated in the In the Air IoT Design Challenge, the partners, element14 and the wider public have been deeply impressed by the projects we've seen to help create ...(read more)

Blog Summary #008 : In The Air Challenge 2014 - Final

cstanton — Fri, 13 Mar 2015 12:44:38 GMT

The In The Air Challenge is running from September 22nd to final submission date of February 27th (at midnight).Previous Activity:Blog Summary #000 : In The Air Challenge 2014 Blog Summary #001 : In The Air Challenge 2014 Blog Summary #002 : In The Air...(read more)

Dust, Temperature and Humidity Monitor Chapter 12

engswee — Mon, 09 Mar 2015 03:57:09 GMT

Programing code and Hardware:Like what I guess. I really stuck at the programing coding. It take me more time then the given. The given example code from the Sensirion cannot just implemented directly in the Energia . Example code from Arduino also n...(read more)

[Air ex Machina] Interlude

nikil511 — Sun, 01 Mar 2015 22:41:23 GMT

well, obviously I overestimated my free time when I designed the project concept, hence did not manage to complete the system. It was really fun though, and a great opportunity to play with some really cool stuff, like the TI launchpads, BBB, BitScop...(read more)

[Air ex Machina] #07 Device Managment - OTA update

nikil511 — Sun, 01 Mar 2015 21:13:07 GMT

One of, the most important aspects for an IoT solution, in my point of view, is device management, and more specifically the ability to receive over the air firmware updates (OTA). If OTA works, all other problems can be potentially solved.My archite...(read more)

IOT - In the Air Challenge - Portable Field Tester - Not so final report

dwinhold — Sun, 01 Mar 2015 09:02:04 GMT

Hello everyone from Chrystal and Dale, We want to thank everyone for this exciting and very big learning experience. Although we didn't complete 100% of what was planned, we will continue to work on this project until finished. For both of u...(read more)

In the Air Design Challenge - Pollen & Allergen Sensing - Post 9 (Project Snapshot)

tomaja — Sat, 28 Feb 2015 01:50:22 GMT

Previous posts:In the Air Design Challenge - Pollen & Allergen Sensing In the Air Design Challenge - Pollen & Allergen Sensing – Post 1 (Pollen Sensor)In the Air Design Challenge - Pollen & Allergen Sensing – Post 2 In the Air Design Challe...(read more)

In-the-Air-Challenge: AirSchool Project Summary

janisalnis — Fri, 27 Feb 2015 22:37:17 GMT

Previous post: In-the-Air-Challenge: Air filter checking with a home-built laser+photodiode dust counterRoadtest winners: http://www.element14.com/community/community/design-challenges/in-the-air-design-challenge/blog/2015/03/17/in-the-air-de…Communi...(read more)

In The Air: Summary Post

michaelwylie — Fri, 27 Feb 2015 22:20:16 GMT

Previous Content:In The Air: Epidose 1: Introduction In The Air: Episode 2 - Preparing for Surface Mount Work In The Air: Episode 3 - Surface Mount Beginnings In The Air: Episode 4 - Inductors In The Air: Episode 5 - PCB Design In The Air: Episode 6 - Get...(read more)

[AirCare] InTheAir - Final Summary

fvan — Fri, 27 Feb 2015 19:38:39 GMT

Previous posts for this project:[AirCare] InTheAir - Project Description [AirCare] InTheAir - Week 1: Getting a Launchpad to Blink [AirCare] InTheAir - Week 2: Preparing the Beaglebone Black [AirCare] InTheAir - Week 3: Fuel Tank Testing [AirCare] InTheA...(read more)

Carbon Footprint Monitoring - Summary

xever — Fri, 27 Feb 2015 12:41:00 GMT

Preface Before anything else, I would like to personally thank the organisers and sponsors of this challenge, and kudos to doctorcdf for the great support and ironing out issues around some duties on the kits. This challenge has been really an ...(read more)

[Firecracker Analyzer] Challenge Summary and Future Work

ipv1 — Fri, 27 Feb 2015 10:47:21 GMT

Introduction Work Plan Energy Harvester Module based on the TI BQ25504 and a SuperCap Energy Efficient Wireless Sensor Node based on the TI CC110L and FR5969 Gateway device Based on the BeagleBone Black Standalone Sensor Node based on the T...(read more)

[AirCare] InTheAir - Week 18: Finalizing Things

fvan — Thu, 26 Feb 2015 21:36:16 GMT