/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/air-ex-machina-03-cc3200-with-ccstudioDownloaded CCStudio, after creating an account on TI http://www.ti.com/tool/ccstudio I am familiar with eclipse based IDEs (for java though), so I thought how hard can this be ?well... took me an couple of hours to find my way, and understand just theen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/air-ex-machina-03-cc3200-with-ccstudioSat, 08 Nov 2014 20:49:34 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:a657654d-b8ce-405d-a371-6d55fa9e88b0shabaz1<p>Hi Manolis,</p><p>&nbsp;</p><p>This is great, glad you&#39;re making progress with the CC3200.</p><p>I didn&#39;t run the out-of-box demo (went straight to trying to upload code to it, hehe), but I&#39;m wondering if the issue is jumper related, because the on-board sensors may be </p><p>disconnect-able.</p><p>The photos on my blog entry have the default as-shipped jumpers connected, just the Uniflash one moved as required. Does your board have the same jumpers connected (I notice J2 and J3</p><p>are marked SDA/SCL so they will be relevant - presuming they disconnect/connect the sensors, although I didn&#39;t check the schematic).</p><img src="https://community.element14.com/aggbug?PostID=19159&AppID=102&AppType=Weblog&ContentType=0" width="1" height="1">