/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/dust-temperature-and-humidity-monitor-chapter-9Best view 1920 X 1200CAM editing:Still editing the CAM file to make all hardware compatible with the PCB.Having some down side due to different pin location but still able to solve the issue. Just need to be careful when using this PCB due to non comen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/dust-temperature-and-humidity-monitor-chapter-9Mon, 26 Jan 2015 19:42:17 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:2829a366-0907-452f-87c3-c611df10226dDAB1<p>It will be interesting to see if your breakout lines act like an antenna at the wifi frequencies.</p><p>&nbsp;</p><p>I do like the idea of getting access to all of the pins, but you may find that you will drastically change the operation of the board.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=19399&AppID=102&AppType=Weblog&ContentType=0" width="1" height="1">