/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/air-ex-machina-05-lost-in-the-sensorsSo many sensors, so little time!Have been studying sensor datasheets all this time to make up my mind on what sensors to use. Found it very hard come up with a meaningful, doable and useful selection. I was tempted to go for a full blown list of thesen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/air-ex-machina-05-lost-in-the-sensorsSun, 21 Dec 2014 22:23:31 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:bc88bc64-8938-4779-a377-69f231e5686cDAB0<p>I am not surprised.</p><p>With new MEMs technology and SOC capability, singular sensors are probably going to be a thing of the past.</p><p>&nbsp;</p><p>Especially with related sensors for environmental monitoring.&nbsp; You will probably see even more integrated sensor systems in the near future.</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=19516&AppID=102&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/air-ex-machina-05-lost-in-the-sensorsSun, 21 Dec 2014 20:55:32 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:bc88bc64-8938-4779-a377-69f231e5686cshabaz1<p>Hi Manolis,</p><p>&nbsp;</p><p>Thanks for the excellent post!!</p><p>What an great idea, to have a ventilation method that can close when it rains : )</p><p>If you have a design file for your case at any stage, I&#39;d be happy to ask colleagues at work to 3D-print it and post it to you, just send me a PM.</p><p>Also, thanks for showing the GE module, very interesting. It is out of stock now : ( </p><p>I see what you mean, the MG135 output on that site does look quite bizarre!</p><p>Good luck with the work, and hope you have some time to relax too : )</p><img src="https://community.element14.com/aggbug?PostID=19516&AppID=102&AppType=Weblog&ContentType=0" width="1" height="1">