/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/firecracker-analyzer-testing-the-hdc1000-on-my-own-boardPreludeI have been busy with the IoT HOliday Lights project but after its completion, I have jumped right back here. I had the boards manufactured from Seeed and they look good. I will post a progress blog separately, but right now, I need to post aben-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/firecracker-analyzer-testing-the-hdc1000-on-my-own-boardTue, 27 Jan 2015 12:29:08 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:e1bc4dc5-b303-4efc-b304-8fb8d5d1da24tomaja1<p>Hi IS,</p><p>&nbsp;</p><p>I&#39;m using the same sensor and I also used Bus Pirate for a quick sensor test. You can read my post here: <a class="jive-link-blog-small" href="/challengesprojects/design-challenges/in-the-air-design-challenge/b/blog/posts/in-the-air-design-challenge---pollen-allergen-sensing-post-6-hdc1000-sensor">In the Air Design Challenge - Pollen &amp; Allergen Sensing – Post 6 (HDC1000 Sensor)</a></p><p>I&#39;m using 0x1000 config value (only bit 12 is set - measure temperature and humidity at the same time with maximum precision). It works fine.</p><p>&nbsp;</p><p>Dragan</p><img src="https://community.element14.com/aggbug?PostID=19791&AppID=102&AppType=Weblog&ContentType=0" width="1" height="1">