/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/dust-temperature-and-humidity-monitor-chapter-12Programing code and Hardware:Like what I guess. I really stuck at the programing coding. It take me more time then the given. The given example code from the Sensirion cannot just implemented directly in the Energia . Example code from Arduino also nen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/dust-temperature-and-humidity-monitor-chapter-12Tue, 10 Mar 2015 21:15:34 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:c3c25f44-6ca5-4e11-a889-18e9b714aed1xever0<p>Have a look at the driver implementation for the <a class="jive-link-external-small" href="http://riot-os.org/api/group__sht11.html" rel="nofollow ugc noopener" target="_blank" title="http://riot-os.org/api/group__sht11.html">SHT11</a> from RIOT-OS.&nbsp; I used this in the past and worked well.&nbsp; You need to port it slightly though to fit with Energia recommended driver architecture.</p><p>&nbsp;</p><p>However, during this challenge and after being introduced and used to TI&#39;s HDC1000, I would highly recommend to use that instead in future designs.</p><p>&nbsp;</p><p>Christever</p><img src="https://community.element14.com/aggbug?PostID=19950&AppID=102&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/dust-temperature-and-humidity-monitor-chapter-12Mon, 09 Mar 2015 12:01:04 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:c3c25f44-6ca5-4e11-a889-18e9b714aed1clem570<p>Hang in there. Things happen in spurts with coding.</p><img src="https://community.element14.com/aggbug?PostID=19950&AppID=102&AppType=Weblog&ContentType=0" width="1" height="1">