/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/firecracker-analyzer-hot-air-assembly-of-ti-solar-harvesterIntroduction Setting things up Results Lessons learned Status Update 1 Introduction In my previous posts here and here, I made a small circuit with the prescribed parts from Texas Instruments and made a PCB for it. I recently receiveen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/in-the-air-design-challenge/b/blog/posts/firecracker-analyzer-hot-air-assembly-of-ti-solar-harvesterSat, 21 Feb 2015 09:48:32 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:ce27e357-0c12-4ab0-acf0-f09f8b7831b6tomaja1<p>Ah, that&#39;s really bad luck.</p><p>I&#39;m also having trouble with bq25504 and it&#39;s getting really annoying. It&#39;s really hard to &quot;debug&quot;.</p><p>&nbsp;</p><p>I hope you will manage to complete before the deadline.</p><p>&nbsp;</p><p>Dragan</p><img src="https://community.element14.com/aggbug?PostID=19980&AppID=102&AppType=Weblog&ContentType=0" width="1" height="1">