In the Air Design Challenge

Forum Arduino+GPRS or Raspberry-Pi to Airvantage

Actions

Forum Thread Details

State Suggested Answer
Replies 3 replies
Answers 2 answers
Subscribers 4 subscribers
Views 173 views
Users 0 members are here

Related

Arduino+GPRS or Raspberry-Pi to Airvantage

ravi_butani over 7 years ago

Hii friends,

I am waiting for BBB. But I have Arduino SIM900 GPRS module and raspberry-pi B+... So I wana start with what I have...

Can you suggest any DIY link for connecting to Airvantage cloud using ARDUINO+SIM900GPRS or Raspberry-Pi...

I have googled a lot but not getting any Idea....

Top Replies

shabaz over 7 years ago +1 suggested

Hi Ravi!

If you're using a third party device, according to Sierra AirVantage documentation here, (needs registration) you can do this using MQTT or even just HTTP.
I'm not familiar with GPRS modules…
tomaja over 7 years ago in reply to shabaz +1 suggested

Here's theirs RPi sample on GitHub: https://github.com/rjacolin/RasPi-mqtt-c

Parents

0 shabaz over 7 years ago

Hi Ravi!

If you're using a third party device, according to Sierra AirVantage documentation here, (needs registration) you can do this using MQTT or even just HTTP.
I'm not familiar with GPRS modules, but probably for a prototype while you are waiting for your hardware, I would not bother with it, and just use the Ethernet
connection on the RPI for now. If you are planning to use the SIM900 for your actual project, then hopefully there should be examples on how to get Internet connectivity
with it on the web.
Cancel
Vote Up +1 Vote Down

Reply

Verify Answer

Reject Answer

Cancel
0 tomaja over 7 years ago in reply to shabaz

Here's theirs RPi sample on GitHub: https://github.com/rjacolin/RasPi-mqtt-c
Cancel
Vote Up +1 Vote Down

Reply

Verify Answer

Reject Answer

Cancel

Reply

0 tomaja over 7 years ago in reply to shabaz

Here's theirs RPi sample on GitHub: https://github.com/rjacolin/RasPi-mqtt-c
Cancel
Vote Up +1 Vote Down

Reply

Verify Answer

Reject Answer

Cancel

Children

No Data