CC3200-LAUNCHXL program uploading data to IoT and hibernating

RE: CC3200-LAUNCHXL program uploading data to IoT and hibernating

av123 — Fri, 20 Jan 2017 08:23:29 GMT

i am facing a similar issue with watchdog . my code hangs . where do i add the hibernate code. in the api source code? or in the watchdog acknowledgement code?

I have already added the hibernate code to implement this "detect a recovery from the WDOG trigger and force the device into complete hibernation "

Could you guide me on this

thanks

RE: CC3200-LAUNCHXL program uploading data to IoT and hibernating

e14 Contributor — Wed, 03 Jun 2015 06:51:39 GMT

I would like to get 4 adc from a cc3200 controller Using energia. But i am able to get from 3 channels only. Pin 0 does not work at all. Are there any recommendation get 4 adc using energia?

RE: CC3200-LAUNCHXL program uploading data to IoT and hibernating

Robert Peter Oakes — Wed, 26 Nov 2014 14:20:02 GMT

The resetting of the CPU when measuring the current will probably be caused by burden voltage (The internal resistance of the current measurement resistor in the meter) dropping enough volts to take the cpu below safe operating volts, use a fixed low value resistor and measure the voltage across it instead would help to measure current without dropping too many volts

The Current Meter Gold made and sold by Dave Jones of the EEVBlog would be ideal for this kind of measurement

RE: CC3200-LAUNCHXL program uploading data to IoT and hibernating

pmohan — Wed, 26 Nov 2014 03:37:07 GMT

Oh my god !!! How much information packed in to this one post!!! For a rookie like me, its going to take me a while to digest each section. i intend to. Thank you!!!!

RE: CC3200-LAUNCHXL program uploading data to IoT and hibernating

BigG — Tue, 07 Oct 2014 09:25:53 GMT

I plan to use I2C on the cc3200 for a couple of things so very interested in reading your findings so far. Just to say that if you wanted more ADC channels you could always use this little handy breakout board which converts analogue to I2C. I believe you get 3 channels from this board (3 addressable registers). The JeeLabs Shop - Analog Plug

RE: CC3200-LAUNCHXL program uploading data to IoT and hibernating

DAB — Fri, 05 Sep 2014 19:41:26 GMT

Good update.

I am still stuck with a fuzzy head, but I did get the CCS loaded and I did get my laptop to see the cc3200 wifi net.

DAB

RE: CC3200-LAUNCHXL program uploading data to IoT and hibernating

Robert Peter Oakes — Fri, 05 Sep 2014 01:56:49 GMT

Very good, and very detailed, I like it

I have not had chance to play with my CC3200 yet, be sure when I do Ill be back for tips