/challenges-projects/design-challenges/iot-on-wheels/b/blog/posts/the-konker-connection---blog-4This project needs to start making serious headway against the issues that have presented themselves. First up - the gas tank level sensor technique I am exploring is showing a little more promise after a concerted effort. I procured a surface speakeen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/iot-on-wheels/b/blog/posts/the-konker-connection---blog-4Tue, 17 Oct 2017 09:32:26 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:9c6dac13-5d16-4f4d-a9bb-db3ab02f2fcdmcb11<p>I was wondering if you were to calibrate it using set amounts of fuel to get 1/8, 1/4, 1/3, 2/3 (or the litres).</p><p>Perhaps you start with an empty tank and add a known amount and measure the frequency then store that, add some more, store that, and so on.</p><p>&nbsp;</p><p>I&#39;m not sure if you&#39;re after absolute measurement.</p><p>&nbsp;</p><p>Is the bike injected or a simple carburetor.?</p><p>&nbsp;</p><p>&nbsp;</p><p>Mark</p><img src="https://community.element14.com/aggbug?PostID=3697&AppID=174&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/iot-on-wheels/b/blog/posts/the-konker-connection---blog-4Mon, 16 Oct 2017 17:47:36 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:9c6dac13-5d16-4f4d-a9bb-db3ab02f2fcdDAB1<p>Nice update.</p><p>&nbsp;</p><p>I had a wild thought.&nbsp; I wonder if the normal operating RPM of the engine is going to influence your resonance ability on the motorcycle?</p><p>&nbsp;</p><p>Even at high RPM, there is a lot of low frequency vibrations in and around the bike, which might make your plan moot!</p><p>&nbsp;</p><p>&nbsp;</p><p>DAB</p><img src="https://community.element14.com/aggbug?PostID=3697&AppID=174&AppType=Weblog&ContentType=0" width="1" height="1">