Blog - All Comments

RE: Blog#3 Implementation (Case Enclosure Reliability Monitor)

granularedit — Tue, 27 Dec 2022 09:51:06 GMT

Excellent blog! We also provide the same service and have one of the best hot and cold water dispensers. To learn more, please visit our website. penalty kick online

RE: Blog#4 Testing Part 1 (Case Enclosure Reliability Monitor)

BrunoMars — Fri, 23 Dec 2022 05:00:04 GMT

These updates are absolutely necessary and I look forward to hearing more from you.

iscribble

RE: Monitoring an irrigation canal using LoRa #5

dougw — Sun, 27 Nov 2022 07:03:33 GMT

Well done - getting all the way into a real environment.

RE: Blog 10 - Bringing the hardware all together - Part 2 [updated]

christophesky — Tue, 09 Aug 2022 15:22:00 GMT

It has happened. FInally happened.

pH probe - alas it is no more.

Temp probe 1 - alas it is no more, stainless steel enclosure has rusted and subsequently failed

Turbidity - eroneous measurements not being fed back

I am disappointed :(

RE: Blog 5: Landslide monitoring for the Himalayan region- Testing the enclosure in the field

dansmith57 — Mon, 02 May 2022 21:13:54 GMT

Those boxes are ABS no?

RE: Orb-weaver Rover - Blog #1 - Concept

feiticeir0 — Thu, 21 Apr 2022 15:21:58 GMT

Wow !

What a nice project.

Unfortunately I was unable to read all of your blog posts during the project, but I will now ! Thank you for the mention. Your logo turned out amazing ! Love it !

And this project? Wow ! Awesome. Congratulations !

RE: Addendum BLOG D - Connecting to the Arduino IoT Cloud directly over LoRaWAN

skruglewicz — Mon, 04 Apr 2022 18:05:28 GMT

UPDATE... I tried to conduct the experiment in this blog , but failed. My resuls are described at the end of the blog post.

I did a drive by a gateway location from the map. It clearly shows that the connection is made. I wonder what I'm doing wrong? I'm at a lost here and cannot keep driving past this house to make the connection.

I'm giving up at this point to return later after a few new element14 projects are done.

Thanks in advance for your comments.

RE: Blog#6 Conclusion (Case Enclosure Reliability Monitor)

skruglewicz — Wed, 16 Mar 2022 06:14:40 GMT

I've added another blog Addendum BLOG D - Connecting to the Arduino IoT Cloud directly over LoRaWAN

I designed and implemented a LoRa Gateway finder.

Cheers

[mention:6554aa80b5274fc6a0375c92988b98fa:e9ed411860ed4f2ba0265705b8793d05]

RE: #Blog 5 Just Encase Challenge : Final blog with the results and enclosure conditions

DAB — Thu, 03 Mar 2022 19:10:13 GMT

Good build.

RE: Blog 5: Landslide monitoring for the Himalayan region- Testing the enclosure in the field

DAB — Tue, 01 Mar 2022 19:39:01 GMT

Did you try a test where you buried the box with falling rocks and gravel?

RE: Just Encase Design Challenge - Winter Driving Safety (Blog #5 part 2)

DAB — Tue, 01 Mar 2022 19:33:56 GMT

Very good build.

RE: Orb-Weaver Rover - Blog #6 - Project Overview

beacon_dave — Tue, 01 Mar 2022 19:04:43 GMT

...This type of box pick-up method can scale up to 2 boxes, but a more complex system would be needed if we wanted to use many boxes...

You could perhaps make use of the 4 green bogie arms for box pick-up, a bit like the thigh pockets on 'cargo pants'. Have a pick-up claw rotate 180degrees around each arm.

RE: Orb-Weaver Rover - Blog #6 - Project Overview

genebren — Tue, 01 Mar 2022 17:26:59 GMT

Great Job! I really think that you nailed so many aspects of your robotic platform. I can see a lot of potential for this robot!

RE: Orb-Weaver Rover - Blog #6 - Project Overview

dubbie — Tue, 01 Mar 2022 11:21:35 GMT

This is a really great mobile robot. I want one! A great project that looks good fun.

Dubbie

RE: Orb-Weaver Rover - Blog #5 - Rover Electronics & First Moves!!!

genebren — Mon, 28 Feb 2022 19:51:53 GMT

Wow! The internal stacking brackets for electronics look really good. You have done an amazing job on all of your mechanical parts (great 3D prints)!