Blog 8 - Measure, send, receive, transform, store, display (updated with code)

RE: Blog 8 - Measure, send, receive, transform, store, display (updated with code)

christophesky — Mon, 03 Jan 2022 09:02:05 GMT

My sketch file (ino) for sensors in a working state can be found here: https://github.com/christopherusky/just_encase_challenge/blob/main/software/arduino/sensorsender.ino

I am refactoring at the moment to make it a little cleaner and adding in mark up on what each piece does.

I have temporarily removed the TDS function as this is not behaving as expected and I am unsure if my code OR hardware, or a possibly a mix of both (or it might justy be the price of onions today?)

RE: Blog 8 - Measure, send, receive, transform, store, display (updated with code)

christophesky — Mon, 03 Jan 2022 09:00:17 GMT

I have now included the flow file here: https://github.com/christopherusky/just_encase_challenge/blob/main/software/raspberrypi/node-red-flow.txt

RE: Blog 8 - Measure, send, receive, transform, store, display (updated with code)

christophesky — Thu, 30 Dec 2021 20:41:20 GMT

Next, finish sensor calibrations (TDS, pH, Turbidity).
Add water temp probe.

Finish code refactoring.

Get it all seated in the enclosure and outside in the pond.

Measure measure measure. :)