/challenges-projects/design-challenges/just-encase/b/blog/posts/pool-water-monitoring-12-architecture-design-3-arduino-mkr-1300-wan-data-senderHi all ! Hope everyone is safe and sound. This is the part of the project that will collect and send the data to the receiver part. It will monitor: Water temperature using the DS18b20 High temperature probe Nutrients of the water using the TDS pro.en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/just-encase/b/blog/posts/pool-water-monitoring-12-architecture-design-3-arduino-mkr-1300-wan-data-senderWed, 12 Jan 2022 22:56:34 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:1ff35ad2-bc0e-4996-825d-78bb5004ad6am.ratcliffe2<p>Might be a good idea to also measure the pool water temperature?&nbsp;<br /><br />It is no doubt useful information in general to have about a pool. Temperature also plays quite an important role on TDS/EC and correcting for temperature will be needed for reasonably trustworthy TDS readings.&nbsp;</p><img src="https://community.element14.com/aggbug?PostID=22758&AppID=342&AppType=Weblog&ContentType=0" width="1" height="1">