/challenges-projects/design-challenges/just-encase/b/blog/posts/pool-water-monitoring-21---liftoffHi all ! Hope everyone is well and safe. It finally happen ! We just went live. This weekend was the time to finally put everything together and just turn it on. Data collecting One of the Arduinos MKR 1300 WAN is inside of one of Hammond&#39;s en...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/just-encase/b/blog/posts/pool-water-monitoring-21---liftoffTue, 22 Feb 2022 19:33:18 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:823971e4-8e93-4222-a0a7-3422efdb4734DAB1<p>You will probably need to do shorter sleep cycles and do a systems test more often.</p> <p>The sleep value is probably limited by their use of a 16 bit counter variable, which when you overload it should default to a lower value, but I do not know without seeing what the compiler was set up to implement.</p><img src="https://community.element14.com/aggbug?PostID=23112&AppID=342&AppType=Weblog&ContentType=0" width="1" height="1">