Documents

Winners Announcement - Just Encase Design Challenge

e14phil — Tue, 05 Apr 2022 13:54:37 GMT

Revision 8 posted to Documents by e14phil on 4/5/2022 1:54:37 PM

Join us, in congratulating the winners of the Just Encase with challenge using enclosures from Hammond Manufacturing. These project builds are tested for a hazardous environment, such as extreme cold and heat or exposure to water and humidity.

The winners will win the following prizes and anyone who hit the Finisher criteria will get the finisher prize.

Winners will be sent prizes to the address on their application and will be contacted by danzima

The Prizes

Prize	Prize Category
Grand Prize Sony PlayStation 5 And you win everything in the Runner Up Prize as well!	Approximate Value $1,050 USD* Sony PlayStation 5 Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Runner Up	Approximate Value $150 USD* Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Finisher Prize To be a finisher you must complete 5 blogs and show us testing the resilience of their project.**	Approximate Value $20 USD* Vehicle First Aid Kit

Prize

Prize Category

Grand Prize

Sony PlayStation 5

And you win everything in the Runner Up Prize as well!

Approximate Value $1,050 USD*

Sony PlayStation 5
Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Runner Up

Approximate Value $150 USD*

Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Finisher Prize**

To be a finisher you must complete 5 blogs and show us testing the resilience of their project.

Approximate Value $20 USD*

Vehicle First Aid Kit

The Winners
Grand Prize Winner
milosrasic98 - OrbWeaver Rover

www.youtube.com/watch
See Blog Post

Judges Notes:

Showing the case working in different environments was good, The cases where well utilized with all the components used in the enclosures, The data collected was shown well, The complexity and design of this project was well thought through. The sensor alone was complexed enough but to add the rover to this project put it over the top.

The report was easy to follow, well laid out, and was a fun read. This guy is a stellar designer. Very impressed he was able to turn our box into a fully functioning rover!

Googly eyes for style points!

Runner Up Winner
christopherskala—Garden Pond Monitor

See Blog Post

Judges Notes:

Use of the case in the elements was good. The report was easy to follow and I enjoyed read it. The data collected was display well It also solved a problem that lots of people have. This project was well thought out and showed our cases provided protection against the elements. A complicated project that can measure Water temp at various depths, Total dissolved solids, Water level, pH, Air temp, humidity, light levels, air pressure. I love the testing he did on the enclosures. The one passed 96+ hr submersion test! Very clear results in conclusion. The system works and is very useful!

Finishers:

Finishers will all get the finisher prizes free of charge.

Pratyush_ceteb – Wind Turbine Monitoring

DougW - Just Encase Solar Super Capacitor Weather Station

Feiticeir0 - Pool Water Monitoring

skruglewicz – Case Enclosure Reliability Monitor

vishwasn – Air Quality Monitor Project

milosrasic98 - OrbWeaver Rover

dwinhold – Winter Driving Safety

rsjawale24 - Landslide monitoring for the Himalayan region

RedCharly - Monitoring an irrigation canal using LoRa

gracemcnally - Particulate Matter Monitoring System for Wildfires

christophersky – Garden Pond Monitor

Taifur - Biofloc Monitoring System

guillengap - Monitoring and Protection an Ecological Area

The Judges

Hammond Manufacturing Technical Judging Team
element14 Community Team Judges	1565.contentimage_211379.png

The Sponsored Kit Buy Now	The Specs
Buy Now	Enclosure Case 1554UGY Water Tight ABS 200x120x90 Enclosure
Buy Now	Enclosure Case 1554H2GYCL IP68 60x119x180 PolyCarbonate Enclosure
Buy Now	Electronics Part (x2) The Arduino MKR WAN 1300 has a selection of Arduino compatible sensors
Buy Now	Cable Gland A selection of Hammond Cable Glands
Buy Now	Other Recommended Parts Seeed Studio Grove Starter Kit Adafruit 642 Digital Temperature Sensor Adafruit 412 Servo Motor

Tags: winners, just encase

Winners Announcement - Just Encase Design Challenge

e14phil — Tue, 05 Apr 2022 13:54:37 GMT

Current Revision posted to Documents by e14phil on 4/5/2022 1:54:37 PM

Just Encase Design Challenge

The winners will win the following prizes and anyone who hit the Finisher criteria will get the finisher prize.

Winners will be sent prizes to the address on their application and will be contacted by danzima

The Prizes

Prize	Prize Category
Grand Prize Sony PlayStation 5 And you win everything in the Runner Up Prize as well!	Approximate Value $1,050 USD* Sony PlayStation 5 Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Runner Up	Approximate Value $150 USD* Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Finisher Prize To be a finisher you must complete 5 blogs and show us testing the resilience of their project.**	Approximate Value $20 USD* Vehicle First Aid Kit

Prize

Prize Category

Grand Prize

Sony PlayStation 5

And you win everything in the Runner Up Prize as well!

Approximate Value $1,050 USD*

Sony PlayStation 5
Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Runner Up

Approximate Value $150 USD*

Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Finisher Prize**

To be a finisher you must complete 5 blogs and show us testing the resilience of their project.

Approximate Value $20 USD*

Vehicle First Aid Kit

The Winners
Grand Prize Winner
milosrasic98 - OrbWeaver Rover

www.youtube.com/watch
See Blog Post

Judges Notes:

Googly eyes for style points!

Runner Up Winner
christopherskala—Garden Pond Monitor

See Blog Post

Judges Notes:

Finishers:

Finishers will all get the finisher prizes free of charge.

Pratyush_ceteb – Wind Turbine Monitoring

DougW - Just Encase Solar Super Capacitor Weather Station

Feiticeir0 - Pool Water Monitoring

skruglewicz – Case Enclosure Reliability Monitor

vishwasn – Air Quality Monitor Project

milosrasic98 - OrbWeaver Rover

dwinhold – Winter Driving Safety

rsjawale24 - Landslide monitoring for the Himalayan region

RedCharly - Monitoring an irrigation canal using LoRa

gracemcnally - Particulate Matter Monitoring System for Wildfires

christophersky – Garden Pond Monitor

Taifur - Biofloc Monitoring System

guillengap - Monitoring and Protection an Ecological Area

The Judges

Hammond Manufacturing Technical Judging Team
element14 Community Team Judges

The Sponsored Kit Buy Now	The Specs
Buy Now	Enclosure Case 1554UGY Water Tight ABS 200x120x90 Enclosure
Buy Now	Enclosure Case 1554H2GYCL IP68 60x119x180 PolyCarbonate Enclosure
Buy Now	Electronics Part (x2) The Arduino MKR WAN 1300 has a selection of Arduino compatible sensors
Buy Now	Cable Gland A selection of Hammond Cable Glands
Buy Now	Other Recommended Parts Seeed Studio Grove Starter Kit Adafruit 642 Digital Temperature Sensor Adafruit 412 Servo Motor

Tags: winners, just encase

Winners Announcement - Just Encase Design Challenge

e14phil — Tue, 05 Apr 2022 13:52:03 GMT

Revision 7 posted to Documents by e14phil on 4/5/2022 1:52:03 PM

Just Encase Design Challenge

The winners will win the following prizes and anyone who hit the Finisher criteria will get the finisher prize.

Winners will be sent prizes to the address on their application and will be contacted by danzima

The Prizes

Prize	Prize Category
Grand Prize Sony PlayStation 5 And you win everything in the Runner Up Prize as well!	Approximate Value $1,050 USD* Sony PlayStation 5 Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Runner Up	Approximate Value $150 USD* Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Finisher Prize To be a finisher you must complete 5 blogs and show us testing the resilience of their project.**	Approximate Value $20 USD* Vehicle First Aid Kit

Prize

Prize Category

Grand Prize

Sony PlayStation 5

And you win everything in the Runner Up Prize as well!

Approximate Value $1,050 USD*

Sony PlayStation 5
Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Runner Up

Approximate Value $150 USD*

Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Finisher Prize**

To be a finisher you must complete 5 blogs and show us testing the resilience of their project.

Approximate Value $20 USD*

Vehicle First Aid Kit

The Winners
Grand Prize Winner
milosrasic98 - OrbWeaver Rover

www.youtube.com/watch

See Blog Post

Judges Notes:

Googly eyes for style points!

Runner Up Winner
christopherskala—Garden Pond Monitor

See Blog Post

Use of the case in the elements was good.
The report was easy to follow and I enjoyed read it.
The data collected was display well
It also solved a problem that lots of people have.
This project was well thought out and showed our cases provided protection against the elements
A complicated project that can measure Water temp at various depths, Total dissolved solids, Water level, pH, Air temp, humidity, light levels, air pressure
I love the testing he did on the enclosures. The one passed 96+ hr submersion test!
Very clear results in conclusion. The system works and is useful

Finishers:

Pratyush_ceteb – Wind Turbine Monitoring

DougW - Just Encase Solar Super Capacitor Weather Station

Feiticeir0 - Pool Water Monitoring

skruglewicz – Case Enclosure Reliability Monitor

vishwasn – Air Quality Monitor Project

milosrasic98 - OrbWeaver Rover

dwinhold – Winter Driving Safety

rsjawale24 - Landslide monitoring for the Himalayan region

RedCharly - Monitoring an irrigation canal using LoRa

gracemcnally - Particulate Matter Monitoring System for Wildfires

christophersky – Garden Pond Monitor

Taifur - Biofloc Monitoring System

guillengap - Monitoring and Protection an Ecological Area

The Judges

Hammond Manufacturing Technical Judging Team
element14 Community Team Judges	1565.contentimage_211379.png

The Sponsored Kit Buy Now	The Specs
Buy Now	Enclosure Case 1554UGY Water Tight ABS 200x120x90 Enclosure
Buy Now	Enclosure Case 1554H2GYCL IP68 60x119x180 PolyCarbonate Enclosure
Buy Now	Electronics Part (x2) The Arduino MKR WAN 1300 has a selection of Arduino compatible sensors
Buy Now	Cable Gland A selection of Hammond Cable Glands
Buy Now	Other Recommended Parts Seeed Studio Grove Starter Kit Adafruit 642 Digital Temperature Sensor Adafruit 412 Servo Motor

Tags: winners, just encase

Winners Announcement - Just Encase Design Challenge

pchan — Wed, 30 Mar 2022 19:41:41 GMT

Revision 6 posted to Documents by pchan on 3/30/2022 7:41:41 PM

Just Encase Design Challenge

68 Blogs, 28 Videos and a whole lot of blood sweat and tears.

The winners will win the following prizes and anyone who hit the Finisher criteria will get the finisher prize.

Winners will be sent prizes to the address on their application and will be contacted by danzima

The Prizes

Prize	Prize Category
Grand Prize Sony PlayStation 5 And you win everything in the Runner Up Prize as well!	Approximate Value $1,050 USD* Sony PlayStation 5 Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Runner Up	Approximate Value $150 USD* Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Finisher Prize To be a finisher you must complete 5 blogs and show us testing the resilience of their project.**	Approximate Value $20 USD* Vehicle First Aid Kit

Prize

Prize Category

Grand Prize

Sony PlayStation 5

And you win everything in the Runner Up Prize as well!

Approximate Value $1,050 USD*

Sony PlayStation 5
Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Runner Up

Approximate Value $150 USD*

Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Finisher Prize**

To be a finisher you must complete 5 blogs and show us testing the resilience of their project.

Approximate Value $20 USD*

Vehicle First Aid Kit

The Winners
Grand Prize Winner
milosrasic98 - OrbWeaver Rover
See Blog Post

Showing the case working in different environments was good.
the cases where well utilized with all the components used in the enclosures.
The data collected was shown well.
The complexity and design of this project was well thought through. The sensor alone was complexed enough but to add the rover to this project put it over the top.
The report was easy to follow, well laid out, and was a fun read.
One thing I didn’t like to see in the report was, they mentioned to use Loctite to seal holes. this will destroy the plastic and should not be used on our plastic enclosures.
This guy is a stellar designer. Very impressed he was able to turn our box into a fully functioning rover!
He also made a temp, humidity and air pressure logger and showed the enclosure being used outside in the elements which shows its intended function.
I also liked the rover just because it was so thorough with nice photos and videos.
So different and an unusual to use the enclosure as the main body of a rover.
Googly eyes for style points.

Runner Up Winner
christopherskala—Garden Pond Monitor
See Blog Post

Use of the case in the elements was good.
The report was easy to follow and I enjoyed read it.
The data collected was display well
It also solved a problem that lots of people have.
This project was well thought out and showed our cases provided protection against the elements
A complicated project that can measure Water temp at various depths, Total dissolved solids, Water level, pH, Air temp, humidity, light levels, air pressure
I love the testing he did on the enclosures. The one passed 96+ hr submersion test!
Very clear results in conclusion. The system works and is useful

Finishers:

Pratyush_ceteb – Wind Turbine Monitoring

DougW - Just Encase Solar Super Capacitor Weather Station

Feiticeir0 - Pool Water Monitoring

skruglewicz – Case Enclosure Reliability Monitor

vishwasn – Air Quality Monitor Project

milosrasic98 - OrbWeaver Rover

dwinhold – Winter Driving Safety

rsjawale24 - Landslide monitoring for the Himalayan region

RedCharly - Monitoring an irrigation canal using LoRa

gracemcnally - Particulate Matter Monitoring System for Wildfires

christophersky – Garden Pond Monitor

Taifur - Biofloc Monitoring System

guillengap - Monitoring and Protection an Ecological Area

The Judges

Hammond Manufacturing Technical Judging Team
element14 Community Team Judges	1565.contentimage_211379.png

The Sponsored Kit Buy Now	The Specs
Buy Now	Enclosure Case 1554UGY Water Tight ABS 200x120x90 Enclosure
Buy Now	Enclosure Case 1554H2GYCL IP68 60x119x180 PolyCarbonate Enclosure
Buy Now	Electronics Part (x2) The Arduino MKR WAN 1300 has a selection of Arduino compatible sensors
Buy Now	Cable Gland A selection of Hammond Cable Glands
Buy Now	Other Recommended Parts Seeed Studio Grove Starter Kit Adafruit 642 Digital Temperature Sensor Adafruit 412 Servo Motor

Tags: winners, just encase

Winners Announcement - Just Encase Design Challenge

pchan — Wed, 30 Mar 2022 19:24:09 GMT

Revision 5 posted to Documents by pchan on 3/30/2022 7:24:09 PM

Just Encase Design Challenge

68 Blogs, 28 Videos and a whole lot of blood sweat and tears.

The winners will win the following prizes and anyone who hit the Finisher criteria will get the finisher prize.

Winners will be sent prizes to the address on their application and will be contacted by danzima

The Prizes

Prize	Prize Category
Grand Prize Sony PlayStation 5 And you win everything in the Runner Up Prize as well!	Approximate Value $1,050 USD* Sony PlayStation 5 Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Runner Up	Approximate Value $150 USD* Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Finisher Prize To be a finisher you must complete 5 blogs and show us testing the resilience of their project.**	Approximate Value $20 USD* Vehicle First Aid Kit

Prize

Prize Category

Grand Prize

Sony PlayStation 5

And you win everything in the Runner Up Prize as well!

Approximate Value $1,050 USD*

Sony PlayStation 5
Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Runner Up

Approximate Value $150 USD*

Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Finisher Prize**

To be a finisher you must complete 5 blogs and show us testing the resilience of their project.

Approximate Value $20 USD*

Vehicle First Aid Kit

The Winners
Grand Prize Winner
milosrasic98 - OrbWeaver Rover
See Blog Post

Showing the case working in different environments was good.
the cases where well utilized with all the components used in the enclosures.
The data collected was shown well.
The complexity and design of this project was well thought through. The sensor alone was complexed enough but to add the rover to this project put it over the top.
The report was easy to follow, well laid out, and was a fun read.
One thing I didn’t like to see in the report was, they mentioned to use Loctite to seal holes. this will destroy the plastic and should not be used on our plastic enclosures.
This guy is a stellar designer. Very impressed he was able to turn our box into a fully functioning rover!
He also made a temp, humidity and air pressure logger and showed the enclosure being used outside in the elements which shows its intended function.
I also liked the rover just because it was so thorough with nice photos and videos.
So different and an unusual to use the enclosure as the main body of a rover.
Googly eyes for style points.

Runner Up Winner
christopherskala—Garden Pond Monitor
See Blog Post

Use of the case in the elements was good.
The report was easy to follow and I enjoyed read it.
The data collected was display well
It also solved a problem that lots of people have.
This project was well thought out and showed our cases provided protection against the elements
A complicated project that can measure Water temp at various depths, Total dissolved solids, Water level, pH, Air temp, humidity, light levels, air pressure
I love the testing he did on the enclosures. The one passed 96+ hr submersion test!
Very clear results in conclusion. The system works and is useful

Finishers:

Pratyush_ceteb – Wind Turbine Monitoring

DougW - Just Encase Solar Super Capacitor Weather Station

Feiticeir0 - Pool Water Monitoring

skruglewicz – Case Enclosure Reliability Monitor

vishwasn – Air Quality Monitor Project

milosrasic98 - OrbWeaver Rover

dwinhold – Winter Driving Safety

rsjawale24 - Landslide monitoring for the Himalayan region

RedCharly - Monitoring an irrigation canal using LoRa

gracemcnally - Particulate Matter Monitoring System for Wildfires

christophersky – Garden Pond Monitor

Taifur - Biofloc Monitoring System

guillengap - Monitoring and Protection an Ecological Area

The Judges

Hammond Manufacturing Technical Judging Team
element14 Community Team Judges	1565.contentimage_211379.png

The Sponsored Kit Buy Now	The Specs
Buy Now	Enclosure Case 1554UGY Water Tight ABS 200x120x90 Enclosure
Buy Now	Enclosure Case 1554H2GYCL IP68 60x119x180 PolyCarbonate Enclosure
Buy Now	Electronics Part (x2) The Arduino MKR WAN 1300 has a selection of Arduino compatible sensors
Buy Now	Cable Gland A selection of Hammond Cable Glands
Buy Now	Other Recommended Parts Seeed Studio Grove Starter Kit Adafruit 642 Digital Temperature Sensor Adafruit 412 Servo Motor

Tags: winners, just encase

Winners Announcement - Just Encase Design Challenge

e14phil — Wed, 30 Mar 2022 15:38:18 GMT

Revision 1 posted to Documents by e14phil on 3/30/2022 3:38:18 PM

Just Encase Design Challenge

Join us, in congratulating the winners of the Just Encase with Hammoned Enclosures

Make IoT work in industry, using Infineon’s low-power compute, connectivity, and sensing technology!

68 Blogs, 28 Videos and a whole lot of blood sweat and tears.

The winners will win the following prizes and anyone who hit the Finisher criteria will get the finisher prize.

Winners will be sent prizes to the address on their application and will be contacted by danzima

The Prizes

Prize	Prize Category
Grand Prize Sony PlayStation 5 And you win everything in the Runner Up Prize as well!	Approximate Value $1,050 USD* Sony PlayStation 5 Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Runner Up	Approximate Value $150 USD* Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Finisher Prize To be a finisher you must complete 5 blogs and show us testing the resilience of their project.**	Approximate Value $20 USD* Vehicle First Aid Kit

Prize

Prize Category

Grand Prize

Sony PlayStation 5

And you win everything in the Runner Up Prize as well!

Approximate Value $1,050 USD*

Sony PlayStation 5
Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Runner Up

Approximate Value $150 USD*

Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Finisher Prize**

To be a finisher you must complete 5 blogs and show us testing the resilience of their project.

Approximate Value $20 USD*

Vehicle First Aid Kit

The Winners

Grand Prize Winner
milosrasic98 - OrbWeaver Rover
/search?q=just%20encase#serpauthor=46770&serpcategory=blog&serpgroup=354&serpsort=date%20desc

Showing the case working in different environments was good.
the cases where well utilized with all the components used in the enclosures.
The data collected was shown well.
The complexity and design of this project was well thought through. The sensor alone was complexed enough but to add the rover to this project put it over the top.
The report was easy to follow, well laid out, and was a fun read.
One thing I didn’t like to see in the report was, they mentioned to use Loctite to seal holes. this will destroy the plastic and should not be used on our plastic enclosures.
This guy is a stellar designer. Very impressed he was able to turn our box into a fully functioning rover!
He also made a temp, humidity and air pressure logger and showed the enclosure being used outside in the elements which shows its intended function.
I also liked the rover just because it was so thorough with nice photos and videos.
So different and an unusual to use the enclosure as the main body of a rover.
Googly eyes for style points.

Runner Up Winner
christopherskala – Garden Pond Monitor /search?q=just%20encase#serpauthor=244264&serpcategory=blog&serpgroup=354&serpsort=date%20desc

Use of the case in the elements was good.
The report was easy to follow and I enjoyed read it.
The data collected was display well
It also solved a problem that lots of people have.
This project was well thought out and showed our cases provided protection against the elements
A complicated project that can measure Water temp at various depths, Total dissolved solids, Water level, pH, Air temp, humidity, light levels, air pressure
I love the testing he did on the enclosures. The one passed 96+ hr submersion test!
Very clear results in conclusion. The system works and is useful

Pratyush_ceteb – Wind Turbine Monitoring /search?q=just%20encase#serpauthor=221647&serpcategory=blog&serpgroup=354&serpsort=date%20desc

The use of the pole mount kit was great.
Good use of the enclosure in the elements.
The blog was a good read but I would like to see more of the data collected shown.
All around good project, but it left me wanting more from the blog.
Neat project measuring conditions of a wind turbine during operation.
I liked that he used the pole mount straps and did some vibration testing on the enclosures during use.
He also did some basic water testing which I liked.

DougW - Just Encase Solar Super Capacitor Weather Station
- Simple project to monitor outdoor temperatures, but is solar powered and can send data via Bluetooth.
- Well described and executed, nice finished look on end result. Clearly operates as intended.
- Tested the enclosure outside and good comments on the benefits of our IP rating, etc..

Finishers:

Pratyush_ceteb – Wind Turbine Monitoring

/search?q=just%20encase#serpauthor=221647&serpcategory=blog&serpgroup=354&serpsort=date%20desc

DougW - Just Encase Solar Super Capacitor Weather Station

/search?q=just%20encase#serpauthor=16637&serpcategory=blog&serpgroup=354&serpsort=date%20desc

Feiticeir0 - Pool Water Monitoring

/search?q=just%20encase#serpauthor=241826&serpcategory=blog&serpgroup=354&serpsort=date%20desc

skruglewicz – Case Enclosure Reliability Monitor
/search?q=just%20encase#serpauthor=285493&serpcategory=blog&serpgroup=354&serpsort=date%20desc

vishwasn – Air Quality Monitor Project
/search?q=just%20encase#serpauthor=70356&serpcategory=blog&serpgroup=354&serpsort=date%20desc

milosrasic98 - OrbWeaver Rover
/search?q=just%20encase#serpauthor=46770&serpcategory=blog&serpgroup=354&serpsort=date%20desc

dwinhold – Winter Driving Safety
/search?q=just%20encase#serpauthor=12642&serpcategory=blog&serpgroup=354&serpsort=date%20desc

rsjawale24 - Landslide monitoring for the Himalayan region

/search?q=just%20encase#serpauthor=230652&serpcategory=blog&serpgroup=354&serpsort=date%20desc

RedCharly - Monitoring an irrigation canal using LoRa

/search?q=just%20encase#serpauthor=270692&serpcategory=blog&serpgroup=354&serpsort=date%20desc

gracemcnally - Particulate Matter Monitoring System for Wildfires

/search?q=just%20encase#serpauthor=423219&serpcategory=blog&serpgroup=354&serpsort=date%20desc

christophersky – Garden Pond Monitor

/search?q=just%20encase#serpauthor=244264&serpcategory=blog&serpgroup=354&serpsort=date%20desc

Taifur - Biofloc Monitoring System

/search?q=just%20encase#serpauthor=35163&serpcategory=blog&serpgroup=354&serpsort=date%20desc

guillengap - Monitoring and Protection an Ecological Area

/search?q=*#serpauthor=362384&serpcategory=blog&serpsort=date%20desc&serpgroup=354

The Judges

Hammond Manufacturing Technical Judge Team
element14 Community Judges element14 Community Team	4666.contentimage_217373.png

The Sponsored Kit	The Specs
PSoC™ 6S2 + AIROC™ Wi-Fi/Bluetooth Pioneer Kit PSoC™ 6S2 + AIROC™ Wi-Fi/Bluetooth Pioneer Kit (CY8CKIT-062S2-43012) Buy NowBuy Now	• Ultra-low-power PSoC™ 62 MCU that integrates an Arm® Cortex®-M4 and Cortex-M0+ onto a single chip and provides up to 2 MB of Flash and 1 MB of SRAM • The Murata 1LV Module hosting the ultra-pow-power Infineon AIROC™ CYW43012 802.11 b/g/n Wi-Fi + Dual-Mode Bluetooth combo chipset radio • CapSense capacitive touch sensing enabled buttons and sliders • PSoC 5LP MCU for program/debug • Excelon™-Ultra 4Mbit 108-MHz QSPI nonvolatile F-RAM in an 8-SOIC package

The Sponsored Kit

The Specs

PSoC™ 6S2 + AIROC™ Wi-Fi/Bluetooth Pioneer Kit

(CY8CKIT-062S2-43012)

Buy NowBuy Now

• Ultra-low-power PSoC™ 62 MCU that integrates an Arm® Cortex®-M4 and Cortex-M0+ onto a single chip and provides up to 2 MB of Flash and 1 MB of SRAM

• The Murata 1LV Module hosting the ultra-pow-power Infineon AIROC™ CYW43012 802.11 b/g/n Wi-Fi + Dual-Mode Bluetooth combo chipset radio

• CapSense capacitive touch sensing enabled buttons and sliders

• PSoC 5LP MCU for program/debug

• Excelon™-Ultra 4Mbit 108-MHz QSPI nonvolatile F-RAM in an 8-SOIC package

The Judges

Infineon Technical Judge Team
element14 Community Judges element14 Community Team	1565.contentimage_211379.png

Meet the Challengers of the Just Encase Design challenge and Updated Dates

pchan — Mon, 06 Dec 2021 16:54:00 GMT

Current Revision posted to Documents by pchan on 12/6/2021 4:54:00 PM

Just Encase Design Challenge

Meet the Challengers

The element14 Community is pleased to introduce the Just Encase Design Challenge, in partnership with Hammond Manufacturing. Submit your application with a summary describing the remote monitoring project of your choice, with a focus on subjecting your project to harsh environmental conditions like extreme temperatures, water exposure, debris like dust or dirt, and more. Use the provided Arduino MKR WAN 1300, keep the project safe using one of Hammond's enclosures, and show yourself putting it through its paces!

Want to jet wash your project, bury it in snow, or blast it with sand at the beach? We want to see a video or photos of the before and after!

These challengers have been be selected to receive the FREE enclosure kit to help protect their projects from the cruel, cruel world.

@dougw

gracemcnally
guillengap
taifuranton68

@vinayyn

@pratyush_cetb

What can you build?

Example applications could include:

Beach-side Tide Monitoring
Industrial Plant Predictive Maintenance Device
Freezer Humidity Monitoring System
Outdoor Stadium Crowd Monitor
Quarry Conditions Monitor

To make enough time for the holiday period and delivery of the kits, we have updated the Project Due deadlines.

The Updated Project Due Dates

Project Phases	Dates
Application Period	CLOSED
Application Deadline	CLOSED
Challengers Announced	CLOSED
Build Period	1st December 2021 - 28th February 2022
Projects Due	28th February 2022
Winners Announced	March 2022
Prizes Shipped	March 2022

Good luck to our challengers!

Just Encase Design Challenge

pchan — Mon, 06 Dec 2021 16:51:28 GMT

Current Revision posted to Documents by pchan on 12/6/2021 4:51:28 PM

Just Encase Design Challenge

Sometimes, being a box of electronics can be a hard life, especially if you are a box of electronics in the Just Encase Design Challenge!

Hammond Manufacturing and the element14 Community invite you to come up with the best remote monitoring solution, AND put it into a really hazardous environment.

Will you push your project to its limits?

players.brightcove.net/.../index.html

The Challenge

The element14 Community is pleased to introduce the Just Encase Design Challenge, in partnership with Hammond Manufacturing. Submit your application with a summary describing the remote monitoring project of your choice, with a focus on subjecting your project to harsh environmental conditions like extreme temperatures, water exposure, debris like dust or dirt, and more. Use the provided Arduino MKR WAN 1300, keep the project safe using one of Hammond's enclosures, and show yourself putting it through its paces!

Want to jet wash your project, bury it in snow, or blast it with sand at the beach? We want to see a video or photos of the before and after!

20 challengers will be selected to receive the FREE enclosure kit to help protect their projects from the cruel, cruel world.

What can you build?

Example applications could include:

Beach-side Tide Monitoring
Industrial Plant Predictive Maintenance Device
Freezer Humidity Monitoring System
Outdoor Stadium Crowd Monitor
Quarry Conditions Monitor

The Sponsored Kit Buy KitBuy Kit	The Specs
Buy NowBuy Now	Enclosure Case 1554UGY1554UGY Water Tight ABS 200x120x90 Enclosure
Buy NowBuy Now	Enclosure Case 1554H2GYCL1554H2GYCL IP68 60x119x180 PolyCarbonate Enclosure
Buy NowBuy Now	Electronics Part (x2) The Arduino MKR WAN 1300 has a selection of Arduino compatible sensors
Buy NowBuy Now	Cable Gland A selection of Hammond Cable Glands
Buy NowBuy Now	Other Recommended Parts Seeed Studio Grove Starter KitGrove Starter Kit Adafruit 642 Digital Temperature Sensor642 Digital Temperature Sensor Adafruit 412 Servo Motor412 Servo Motor

Be Rewarded on the Community

For entering and taking part in the Design Challenge competition, you'll be rewarded the following badges:

	Apply to join the Design Challenge and receive a badge and points for applying! Make sure you've thought your application through, made it original and your own work. If you are building upon someone else's work, make sure you cite your sources. Direct copies of work will not be accepted.
	Post your first blog! We expect updates on how your Design Challenge project is going, so don't hold back! Tell us your thoughts, difficulties, and how you're progressing. Remember that you're assessed based upon your updates, and don't be afraid - other challengers and members are there to help you with any problems you might have, and it helps the staff to keep an eye on you!
	5 blogs! Wow, has it really been that long? We hope you'll keep us updated about your project at least once every two weeks, for 10 weeks. We won't be impressed if you only put a one-liner in there; that's what messages are for. Blogs are to make sure you're giving us all of the juicy detail, trials and tribulations of what's going on, and it keeps everyone honest!
	Even if you're not a challenger in the Design Challenge, we appreciate every member who joins in and gives a helping hand to applicants and members. If your messages are found to be helpful, we want to acknowledge that and reward you!

The Prizes

Prize	Prize Category
Grand Prize Sony PlayStation 5 And you win everything in the Runner Up Prize as well!	Approximate Value $1,050 USD* Sony PlayStation 5 Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Runner Up	Approximate Value $150 USD* Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Finisher Prize To be a finisher you must complete 5 blogs and show us testing the resilience of their project.**	Approximate Value $20 USD* Vehicle First Aid Kit

Prize

Prize Category

Grand Prize

Sony PlayStation 5

And you win everything in the Runner Up Prize as well!

Approximate Value $1,050 USD*

Sony PlayStation 5
Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Runner Up

Approximate Value $150 USD*

Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Finisher Prize**

To be a finisher you must complete 5 blogs and show us testing the resilience of their project.

Approximate Value $20 USD*

Vehicle First Aid Kit

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

Hammond Manufacturing Technical Judge Team
element14 Community Judges element14 Community Team

Need help? Comment and read the resources below:

The Dates

To make enough time for the holiday period and delivery of the kits, we have updated the Project Due deadlines.

The Updated Project Due Dates

Project Phases	Dates
Application Period	CLOSED
Application Deadline	CLOSED
Challengers Announced	CLOSED
Build Period	1st December 2021 - 28th February 2022
Projects Due	28th February 2022
Winners Announced	March 2022
Prizes Shipped	March 2022

The Terms

Selected official applicants will be chosen to receive the "Kit" listed above. These successful applicants will be our sponsored challengers, and they must use a Hammond enclosure within their project, and publish their final code and designs on the Community for others to use. Those not chosen as sponsored challengers may also join the competition and be eligible to win prizes, but they must base their projects around the kit listed above and adhere to all terms and conditions of the challenge.

Applicants must post their progress and final project as at least 5 blog posts before the closing date (see above), when projects are due.

Projects that use the enclosure most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

If you are not successful in becoming a sponsored challenger, but still want to enter, all you need to do is use the Kit as described above in your project and adhere to the same Terms and Conditions for a chance to be our winner! Non-sponsored challengers are eligible for the Finisher and Winner Prizes, as well.

Attachments:

community.element14.com/.../Just-Encase-Design-Challenge-Terms-sep-29-2021.pdf

Just Encase Design Challenge Terms sep 29 2021.pdf

Tags: design_challenge, hammond, just_encase

Just Encase Design Challenge

pchan — Mon, 06 Dec 2021 16:50:30 GMT

Revision 2 posted to Documents by pchan on 12/6/2021 4:50:30 PM

Just Encase Design Challenge

Sometimes, being a box of electronics can be a hard life, especially if you are a box of electronics in the Just Encase Design Challenge!

Hammond Manufacturing and the element14 Community invite you to come up with the best remote monitoring solution, AND put it into a really hazardous environment.

Will you push your project to its limits?

players.brightcove.net/.../index.html

The Challenge

Want to jet wash your project, bury it in snow, or blast it with sand at the beach? We want to see a video or photos of the before and after!

20 challengers will be selected to receive the FREE enclosure kit to help protect their projects from the cruel, cruel world.

What can you build?

Example applications could include:

Beach-side Tide Monitoring
Industrial Plant Predictive Maintenance Device
Freezer Humidity Monitoring System
Outdoor Stadium Crowd Monitor
Quarry Conditions Monitor

The Sponsored Kit Buy KitBuy Kit	The Specs
Buy NowBuy Now	Enclosure Case 1554UGY1554UGY Water Tight ABS 200x120x90 Enclosure
Buy NowBuy Now	Enclosure Case 1554H2GYCL1554H2GYCL IP68 60x119x180 PolyCarbonate Enclosure
Buy NowBuy Now	Electronics Part (x2) The Arduino MKR WAN 1300 has a selection of Arduino compatible sensors
Buy NowBuy Now	Cable Gland A selection of Hammond Cable Glands
Buy NowBuy Now	Other Recommended Parts Seeed Studio Grove Starter KitGrove Starter Kit Adafruit 642 Digital Temperature Sensor642 Digital Temperature Sensor Adafruit 412 Servo Motor412 Servo Motor

Be Rewarded on the Community

For entering and taking part in the Design Challenge competition, you'll be rewarded the following badges:

	Apply to join the Design Challenge and receive a badge and points for applying! Make sure you've thought your application through, made it original and your own work. If you are building upon someone else's work, make sure you cite your sources. Direct copies of work will not be accepted.
	Post your first blog! We expect updates on how your Design Challenge project is going, so don't hold back! Tell us your thoughts, difficulties, and how you're progressing. Remember that you're assessed based upon your updates, and don't be afraid - other challengers and members are there to help you with any problems you might have, and it helps the staff to keep an eye on you!
	5 blogs! Wow, has it really been that long? We hope you'll keep us updated about your project at least once every two weeks, for 10 weeks. We won't be impressed if you only put a one-liner in there; that's what messages are for. Blogs are to make sure you're giving us all of the juicy detail, trials and tribulations of what's going on, and it keeps everyone honest!
	Even if you're not a challenger in the Design Challenge, we appreciate every member who joins in and gives a helping hand to applicants and members. If your messages are found to be helpful, we want to acknowledge that and reward you!

The Prizes

Prize	Prize Category
Grand Prize Sony PlayStation 5 And you win everything in the Runner Up Prize as well!	Approximate Value $1,050 USD* Sony PlayStation 5 Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Runner Up	Approximate Value $150 USD* Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Finisher Prize To be a finisher you must complete 5 blogs and show us testing the resilience of their project.**	Approximate Value $20 USD* Vehicle First Aid Kit

Prize

Prize Category

Grand Prize

Sony PlayStation 5

And you win everything in the Runner Up Prize as well!

Approximate Value $1,050 USD*

Sony PlayStation 5
Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Runner Up

Approximate Value $150 USD*

Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Finisher Prize**

To be a finisher you must complete 5 blogs and show us testing the resilience of their project.

Approximate Value $20 USD*

Vehicle First Aid Kit

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

Hammond Manufacturing Technical Judge Team
element14 Community Judges element14 Community Team

Need help? Comment and read the resources below:

The Dates

To make enough time for the holiday period and delivery of the kits, we have updated the Project Due deadlines.

The Updated Project Due Dates

Project Phases	Dates
Application Period	CLOSED
Application Deadline	CLOSED
Challengers Announced	CLOSED
Build Period	1st December 2021 - 28th February 2022
Projects Due	28th February 2022
Winners Announced	March 2022
Prizes Shipped	March 2022

The Terms

Applicants must post their progress and final project as at least 5 blog posts before the closing date (see above), when projects are due.

Projects that use the enclosure most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

Attachments:

community.element14.com/.../Just-Encase-Design-Challenge-Terms-sep-29-2021.pdf

Just Encase Design Challenge Terms sep 29 2021.pdf

Tags: design_challenge, hammond, just_encase

Meet the Challengers of the Just Encase Design challenge and Updated Dates

e14phil — Sat, 20 Nov 2021 02:50:50 GMT

Revision 1 posted to Documents by e14phil on 11/20/2021 2:50:50 AM

Meet the Challengers of the Just Encase Design challenge

Want to jet wash your project, bury it in snow, or blast it with sand at the beach? We want to see a video or photos of the before and after!

These challengers have been be selected to receive the FREE enclosure kit to help protect their projects from the cruel, cruel world.

@dougw

gracemcnally
guillengap
taifuranton68

@vinayyn

@pratyush_cetb

What can you build?

Example applications could include:

Beach-side Tide Monitoring
Industrial Plant Predictive Maintenance Device
Freezer Humidity Monitoring System
Outdoor Stadium Crowd Monitor
Quarry Conditions Monitor

To make enough time for the holiday period and delivery of the kits, we have updated the Project Due deadlines.

The Updated Project Due Dates

Project Phases	Dates
Application Period	CLOSED
Application Deadline	CLOSED
Challengers Announced	CLOSED
Build Period	1st December 2021 - 28th February 2022
Projects Due	28th February 2022
Winners Announced	March 2022
Prizes Shipped	March 2022

Good luck to our challengers!

Just Encase Design Challenge

e14phil — Wed, 17 Nov 2021 13:50:29 GMT

Revision 1 posted to Documents by e14phil on 11/17/2021 1:50:29 PM

Just Encase Design Challenge

Sometimes, being a box of electronics can be a hard life, especially if you are a box of electronics in the Just Encase Design Challenge!

Hammond Manufacturing and the element14 Community invite you to come up with the best remote monitoring solution, AND put it into a really hazardous environment.

Will you push your project to its limits?

players.brightcove.net/.../index.html

The Challenge

Want to jet wash your project, bury it in snow, or blast it with sand at the beach? We want to see a video or photos of the before and after!

20 challengers will be selected to receive the FREE enclosure kit to help protect their projects from the cruel, cruel world.

What can you build?

Example applications could include:

Beach-side Tide Monitoring
Industrial Plant Predictive Maintenance Device
Freezer Humidity Monitoring System
Outdoor Stadium Crowd Monitor
Quarry Conditions Monitor

The Sponsored Kit Buy KitBuy Kit	The Specs
Buy NowBuy Now	Enclosure Case 1554UGY1554UGY Water Tight ABS 200x120x90 Enclosure
Buy NowBuy Now	Enclosure Case 1554H2GYCL1554H2GYCL IP68 60x119x180 PolyCarbonate Enclosure
Buy NowBuy Now	Electronics Part (x2) The Arduino MKR WAN 1300 has a selection of Arduino compatible sensors
Buy NowBuy Now	Cable Gland A selection of Hammond Cable Glands
Buy NowBuy Now	Other Recommended Parts Seeed Studio Grove Starter KitGrove Starter Kit Adafruit 642 Digital Temperature Sensor642 Digital Temperature Sensor Adafruit 412 Servo Motor412 Servo Motor

Be Rewarded on the Community

For entering and taking part in the Design Challenge competition, you'll be rewarded the following badges:

	Apply to join the Design Challenge and receive a badge and points for applying! Make sure you've thought your application through, made it original and your own work. If you are building upon someone else's work, make sure you cite your sources. Direct copies of work will not be accepted.
	Post your first blog! We expect updates on how your Design Challenge project is going, so don't hold back! Tell us your thoughts, difficulties, and how you're progressing. Remember that you're assessed based upon your updates, and don't be afraid - other challengers and members are there to help you with any problems you might have, and it helps the staff to keep an eye on you!
	5 blogs! Wow, has it really been that long? We hope you'll keep us updated about your project at least once every two weeks, for 10 weeks. We won't be impressed if you only put a one-liner in there; that's what messages are for. Blogs are to make sure you're giving us all of the juicy detail, trials and tribulations of what's going on, and it keeps everyone honest!
	Even if you're not a challenger in the Design Challenge, we appreciate every member who joins in and gives a helping hand to applicants and members. If your messages are found to be helpful, we want to acknowledge that and reward you!

The Prizes

Prize	Prize Category
Grand Prize Sony PlayStation 5 And you win everything in the Runner Up Prize as well!	Approximate Value $1,050 USD* Sony PlayStation 5 Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Runner Up	Approximate Value $150 USD* Luxury Earthquake Survival Kit Survival Shelter Vehicle Fire Extinguisher
Finisher Prize To be a finisher you must complete 5 blogs and show us testing the resilience of their project.**	Approximate Value $20 USD* Vehicle First Aid Kit

Prize

Prize Category

Grand Prize

Sony PlayStation 5

And you win everything in the Runner Up Prize as well!

Approximate Value $1,050 USD*

Sony PlayStation 5
Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Runner Up

Approximate Value $150 USD*

Luxury Earthquake Survival Kit
Survival Shelter
Vehicle Fire Extinguisher

Finisher Prize**

To be a finisher you must complete 5 blogs and show us testing the resilience of their project.

Approximate Value $20 USD*

Vehicle First Aid Kit

*Or local equivalent

**Grand Prize and Runner Up winners also earn the finisher prize.

The Judges

Hammond Manufacturing Technical Judge Team
element14 Community Judges element14 Community Team

Need help? Comment and read the resources below:

The Dates

To make enough time for the holiday period and delivery of the kits, we have updated the Project Due deadlines.

The Updated Project Due Dates

Project Phases	Dates
Application Period	CLOSED
Application Deadline	CLOSED
Challengers Announced	CLOSED
Build Period	1st December 2021 - 28th February 2022
Projects Due	28th February 2022
Winners Announced	March 2022
Prizes Shipped	March 2022

The Terms

Applicants must post their progress and final project as at least 5 blog posts before the closing date (see above), when projects are due.

Projects that use the enclosure most creatively, along with posts that are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.

Please read the full terms and conditions of the challenge, attached below.

Ready to join the challenge? Then apply here!

Attachments:

community.element14.com/.../Just-Encase-Design-Challenge-Terms-sep-29-2021.pdf

Just Encase Design Challenge Terms sep 29 2021.pdf

Tags: design_challenge, hammond, just_encase

Documents

migration.user — Tue, 02 Nov 2021 16:59:47 GMT

Current Revision posted to Documents by migration.user on 11/2/2021 4:59:47 PM