N-Gaged Blog

Blog#5 Conclusion (Weather Remote Monitoring System)

skruglewicz — Tue, 05 Jul 2022 02:00:00 GMT

Blog#5 Conclusion (Weather Remote Monitoring System) In this blog, I demonstrate my finished Idea, a Weather Remote Monitoring System. I give some conclusions as to what I have gained from this Design ChallengeI answer some questions like, Did ...(read more)

MTT - Summary

scottiebabe — Fri, 10 Jun 2022 15:45:00 GMT

Maple syrup is a delicious sugar syrup with a distinct flavor that is wonderful compliant to a variety of sweet and savory dishes. In North America I would say, the syrup extremely popular. Regardless, after all the time I spent on this design challe...(read more)

MTT - GW-001-3 Wireless Gateway

scottiebabe — Mon, 06 Jun 2022 13:45:00 GMT

My out of box experience with the GW-001-3 was extremely positive. I followed the included quick start guide and was up and running in minutes! I registered the gateway in my Omega cloud account, connected the power cable, and connected the ethernet ...(read more)

PVMonitor #9 - Conclusions

amgalbu — Fri, 03 Jun 2022 11:29:00 GMT

Blogs in this series PVMonitor #1 - Unboxing and project description PVMonitor #2 - Getting started PVMonitor #3 - The great pretender (1) PVMonitor #4 - The great pretender (2) PVMonitor #5 - Installation and preliminary data PVMonitor #6 - Anomaly...(read more)

Blog#4 Testing (Weather Remote Monitoring System)

skruglewicz — Mon, 30 May 2022 21:00:00 GMT

BLOG# 4 - Testing- Weather Remote Monitoring System This blog will do testing, on the implementation of the design. The following test will be run: 1) Running test with the smart Sensor in the 2 Hammond enclosures.. 2) Running test by putti...(read more)

Blog#3 Implementation (Weather Remote Monitoring System)

skruglewicz — Mon, 30 May 2022 20:50:00 GMT

BLOG# 3- Implementation - Weather Remote Monitoring System This blog will include the Implementation of the Design described in the previous blog in this Series. The Implementation will include: the setup, configuration and implementat...(read more)

Blog#2 Design (Weather Remote Monitoring System)

skruglewicz — Mon, 30 May 2022 20:40:00 GMT

BLOG# 2- Design - Weather Remote Monitoring System This blog will include the Design of my Idea. It will describe my design specifications for the implementation of my idea for a Weather Remote Monitoring System. The design will include th...(read more)

Blog# 1 My Idea (Weather Remote Monitoring System)

skruglewicz — Mon, 30 May 2022 04:56:00 GMT

BLOG# 1 - My Idea - Weather Remote Monitoring System This blog is part of a blog series for the N-gaged Design Challenge. The sponsor of the challenge OMEGA, has supplied me with there Layer N Ecosystem Bundle that is used to imp...(read more)

PVMonitor #8 - Anomaly detection (2)

amgalbu — Sun, 29 May 2022 07:48:00 GMT

MTT - DIY POE Injector

scottiebabe — Sun, 22 May 2022 17:35:00 GMT

With power over ethernet, one cable is all you need for power and data! As part of my Layer-N design challenge project, I wanted to experiment with the POE capabilities of the Omega GW-001-03 Layer-N wireless gateway. Just like POE IP cameras, WIFI a...(read more)

Blog #5 : Smart Poultry Farm Monitoring System : Conclusion and Future Enhancements

wesee — Sun, 22 May 2022 05:39:00 GMT

This is the last blog of the Smart Poultry Farm project. I will do a summary about the project and talk about possible enhancements to the smart farm itself and the Layer-N cloud. Blog #1: This is an introduction. I talked about th...(read more)

PVMonitor #7 - System performances

amgalbu — Sat, 21 May 2022 15:15:00 GMT

PVMonitor #6 - Anomaly detection (1)

amgalbu — Thu, 19 May 2022 17:13:00 GMT

MTT - Ambient Air Temperature Sensing

scottiebabe — Mon, 16 May 2022 17:05:00 GMT

In my application to the layer-n design challenge, I had proposed I would utilize the wired smart temperature probe (SP-005-01) to measure the ambient air temperature in our attic. This is only one of the many thousands of potential temperature meas...(read more)

Blog #4 : Smart Poultry Farm Monitoring System : Alarms, Notifications and Testing

wesee — Mon, 16 May 2022 12:44:00 GMT

. In blog #3, I setup and configured the Gateway, Smart Sensor and Layer-N Cloud. Now I can monitor the system remotely. The various sensors' data (temperature, humidity and light) will be reported to the cloud. This will greatl...(read more)