Challenge Announcement | On The Line Design Challenge

RE: Challenge Announcement | On The Line Design Challenge

sandeepdwivedi17 — Fri, 01 May 2026 13:19:16 GMT

Congratulations everyone.

RE: Challenge Announcement | On The Line Design Challenge

meera_hussien — Mon, 27 Apr 2026 03:11:38 GMT

Congratulations to all

RE: Challenge Announcement | On The Line Design Challenge

colporteur — Sun, 26 Apr 2026 02:21:31 GMT

Teary eyes when I read this posting. I tried to free up time to participate. Since going back to work part time, spare time is limited. Good luck candidates, I watch post with anticipation.

RE: Challenge Announcement | On The Line Design Challenge

skruglewicz — Fri, 24 Apr 2026 19:08:06 GMT

[mention:ef3eff32a0cb4cc7a5e89891f461c343:e9ed411860ed4f2ba0265705b8793d05] , thank you so much for the fantastic news! I am honored to be selected as a challenger for the On The Line Design Challenge.

I also want to extend my sincere thanks to each of the sponsors for providing the hardware and software that make this project possible: Analog Devices, Inc. (ADI), Molex, Emerson NI, DwyerOmega

I am incredibly excited to get my hands on the hardware in the Sponsored Challenger Kit—specifically the challenge of integrating the ADI CAN shield and OmegaDwyer sensors with the UNO Q's Linux environment. However, what I am most looking forward to is utilizing the Emerson | NI LabVIEW trial. Building a real-time "digital twin" dashboard to visualize the edge data and truly bridge the gap between the hardware and the PC is going to be an amazing experience.

Congratulations to all my fellow element14 members selected for this challenge (arvindsa, fyaocn, misaz, pandoramc, saramic, SensoredHacker0, shreaypatel, taifur, and Zhar_14)! I recognize some familiar names and am really looking forward to collaborating with you all on this build.

Let the build begin!

RE: Challenge Announcement | On The Line Design Challenge

dougw — Fri, 24 Apr 2026 02:08:27 GMT

Congratulations on successful proposals.

RE: Challenge Announcement | On The Line Design Challenge

saramic — Thu, 23 Apr 2026 22:22:57 GMT

congratulations to all selected - I must say once I knew what the UNO Q was (Arduino + Docker) I bought one immediately to have a play around with it and am super keen to dig deeper into a project - this Design Challenge will be the driver. I had no idea but CAN bus (Control Area Network) either so keen to see that working as well. Good luck to all, look forward to see what everyone builds!!!

RE: Challenge Announcement | On The Line Design Challenge

arvindsa — Thu, 23 Apr 2026 20:11:40 GMT

Congratulations to all the challengers. I'm gonna definitely enjoy building for this challenge.

RE: Challenge Announcement | On The Line Design Challenge

misaz — Thu, 23 Apr 2026 20:05:59 GMT

Thank you for selecting me and congratulations to other successfull challengers.

Do you have any info part numbers for Molex cable/connectors which is mentioned as TBC on contest page?

RE: Challenge Announcement | On The Line Design Challenge

DAB — Thu, 23 Apr 2026 19:50:55 GMT

I look forward to some interesting projects.

RE: Challenge Announcement | On The Line Design Challenge

Shishir — Thu, 23 Apr 2026 17:39:11 GMT

Congratulations everyone.