/challenges-projects/design-challenges/path2programmable/b/blog/posts/p2p-sw-lab-7-road-blockCreating an SD Boot Image This lab was very straightforward, but I ran into an issue that left me scratching my head for a while. This lab used the previously created &quot;Test_Peripherals&quot; application to build the SD card boot image....en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/path2programmable/b/blog/posts/p2p-sw-lab-7-road-blockSat, 02 Nov 2019 03:28:42 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:6a5052a8-f4a1-481e-be70-3039023b3068cmelement140<p>I posted a solution to the problem you encountered here:</p><p>&nbsp;</p><p><a class="jive-link-blog-small" href="/challengesprojects/design-challenges/path2programmable/b/blog/posts/do-not-hide-the-problem---a-correct-sw-lab-7-solution">Do Not Hide the Problem - A Correct SW Lab 7 Solution</a> </p><img src="https://community.element14.com/aggbug?PostID=8054&AppID=242&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/path2programmable/b/blog/posts/p2p-sw-lab-7-road-blockSun, 27 Oct 2019 20:30:30 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:6a5052a8-f4a1-481e-be70-3039023b3068nerdyupdates0<p><span>[mention:2bb571032d0b4fae9a32a009b64212bc:e9ed411860ed4f2ba0265705b8793d05]</span> Hi Adam, thought I would bring your attention to this post, as I had an issue in SW Lab 7. Perhaps an update that can be made to the Zynq MPSoC software lab instructions in the future.</p><img src="https://community.element14.com/aggbug?PostID=8054&AppID=242&AppType=Weblog&ContentType=0" width="1" height="1">