/challenges-projects/design-challenges/path2programmable/b/blog/posts/hello-world-intro-setup-hw-labs-1-2We are now 2 and half weeks into this challenge and I have finally got my Ultra96-V2 printing out Hello World onto the UART. This feels like a suitable point to write my first ever blog post! Intro to courseThis will be a series of blog po...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/path2programmable/b/blog/posts/hello-world-intro-setup-hw-labs-1-2Sat, 02 Nov 2019 03:37:05 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:39a1baae-8aab-4709-a5b2-a6fadaf5e87acmelement140<p>I have seen the same VM error message (i.e., &quot;System program problem detected&quot;) a few times before, but usually it disappears after one or multiple Ubuntu updates. Make sure you keep updating Ubuntu.</p><img src="https://community.element14.com/aggbug?PostID=8084&AppID=242&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/path2programmable/b/blog/posts/hello-world-intro-setup-hw-labs-1-2Wed, 30 Oct 2019 17:24:44 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:39a1baae-8aab-4709-a5b2-a6fadaf5e87aclem570<p>Very nice write up, <span>[mention:26fe85c9cf4645a19dca0c9e112a7a25:e9ed411860ed4f2ba0265705b8793d05]</span>&nbsp; . I guess the going is a little rough at this point. Any changes you would recommend at this point? Something you would do differently maybe?</p><p>Clem</p><img src="https://community.element14.com/aggbug?PostID=8084&AppID=242&AppType=Weblog&ContentType=0" width="1" height="1">