/challenges-projects/design-challenges/path2programmable/b/blog/posts/piip---petalinux-lessons-completeI have now finished all the training content for Path II Programmable! In this series, we are provided an Ultra96 board and a series of training modules focused around three areas - Hardware (the FPGA side), Software (the microprocessor side), a...en-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/path2programmable/b/blog/posts/piip---petalinux-lessons-completeFri, 06 Dec 2019 18:43:33 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:5ad77971-63b0-46a7-ba8d-c31867a72199rscasny0<p>James,</p><p>&nbsp;</p><p>Thanks for all the blogs and videos. I appreciate your hard work.</p><p>&nbsp;</p><p>Randall</p><p>--element14 Team</p><img src="https://community.element14.com/aggbug?PostID=8182&AppID=242&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/path2programmable/b/blog/posts/piip---petalinux-lessons-completeTue, 12 Nov 2019 18:58:54 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:5ad77971-63b0-46a7-ba8d-c31867a72199Fred271<p>I&#39;m really struggling with PetaLinux - but it doesn&#39;t help that I decided to jump in with Vitis / 2019.2. My generated BSP file seems very lightweight and doesn&#39;t have the components folder inside with the DTSI file need for petalinux-config. Maybe I&#39;ll have to bite the bullet and run 2018.2 or 2018.3 instead. That way I&#39;ve at least got a chance of following along with what everyone else is doing.</p><img src="https://community.element14.com/aggbug?PostID=8182&AppID=242&AppType=Weblog&ContentType=0" width="1" height="1">