/challenges-projects/design-challenges/pathtoprogrammable/b/blog/posts/day-0---minized-zynq-fpga-arrivesLast Thursday I finally received the MiniZed development board from Element14. Many thanks to the community and the element14 judges for selecting me as one of the participants. The development board was well packed and came in with some essential inen-USTelligent Community 12https://community.element14.com/challenges-projects/design-challenges/pathtoprogrammable/b/blog/posts/day-0---minized-zynq-fpga-arrivesMon, 15 Oct 2018 18:21:39 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:890c02eb-be2d-49c8-93ec-b29fc9586bc3shabaz1<p>Hehe I couldn&#39;t understand the hole strategy either.</p><p>As for the jumpers.. maybe they fell off a different production line : ) mine didn&#39;t have them (although I should double-check now! : )</p><p>Good luck with the course!</p><img src="https://community.element14.com/aggbug?PostID=5667&AppID=209&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/pathtoprogrammable/b/blog/posts/day-0---minized-zynq-fpga-arrivesSun, 07 Oct 2018 14:40:06 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:890c02eb-be2d-49c8-93ec-b29fc9586bc3genebren1<p>Nice looking board indeed.&nbsp; Good luck on your training exercises and the successful completion of your project!</p><p>Gene</p><img src="https://community.element14.com/aggbug?PostID=5667&AppID=209&AppType=Weblog&ContentType=0" width="1" height="1">https://community.element14.com/challenges-projects/design-challenges/pathtoprogrammable/b/blog/posts/day-0---minized-zynq-fpga-arrivesSun, 07 Oct 2018 12:24:24 GMT93d5dcb4-84c2-446f-b2cb-99731719e767:890c02eb-be2d-49c8-93ec-b29fc9586bc3Gough Lui1<p>Nice to see the board up-close. Quite a packed board indeed.</p><p>&nbsp;</p><p>It seems like the three holes are in the same place as the holes on the Arduino Uno-type boards - it&#39;s probably for compatibility reasons with shields/cases even though the footprint is bigger. The fourth hole of the Uno is where D1 is, so I guess they omitted that hole because of design requirements.</p><p>&nbsp;</p><p>- Gough</p><img src="https://community.element14.com/aggbug?PostID=5667&AppID=209&AppType=Weblog&ContentType=0" width="1" height="1">