[Pi IoT] Alarm Clock #07: Sense HAT

RE: [Pi IoT] Alarm Clock #07: Sense HAT

fvan — Wed, 13 Jul 2016 16:34:25 GMT

New library was released, providing native use of the joystick! [Pi IoT] Sense HAT: New Release Python Library

RE: [Pi IoT] Alarm Clock #07: Sense HAT

georgekav — Thu, 30 Jun 2016 21:35:44 GMT

[mention:ca2fe37c8c70477fb45e83ddaf152e5d:e9ed411860ed4f2ba0265705b8793d05] I had the exact same problem with you in the magnetometer (even worse in fact 130-150 degrees only). I followed this calibration https://www.raspberrypi.org/documentation/hardware/sense-hat/ and to my surprise it worked

RE: [Pi IoT] Alarm Clock #07: Sense HAT

rhe123 — Thu, 30 Jun 2016 06:01:30 GMT

Tested my Sense Hat as well, I'm getting the following results:

[embed:dc8ab71f-3b98-42d9-b0f6-e21e02a0f8e2:3ef06e6b-9b7d-4651-b12d-db8be7f5e991:type=text&text=Temp+%28H%29+%3D+-5.7%C2%B0C++++Temp+%28P%29+%3D+31.4%C2%B0C++++Prsr+%3D+1012.7mb+++Hmdt+%3D+22.9%25%0ATemp+%28H%29+%3D+-5.6%C2%B0C++++Temp+%28P%29+%3D+31.4%C2%B0C++++Prsr+%3D+1012.7mb+++Hmdt+%3D+22.9%25%0ATemp+%28H%29+%3D+-5.6%C2%B0C++++Temp+%28P%29+%3D+31.4%C2%B0C++++Prsr+%3D+1012.7mb+++Hmdt+%3D+22.9%25%0ATemp+%28H%29+%3D+-5.7%C2%B0C++++Temp+%28P%29+%3D+31.4%C2%B0C++++Prsr+%3D+1012.7mb+++Hmdt+%3D+22.9%25%0ATemp+%28H%29+%3D+-5.7%C2%B0C++++Temp+%28P%29+%3D+31.4%C2%B0C++++Prsr+%3D+1012.7mb+++Hmdt+%3D+22.9%25]

Not as far off as yours, but still not close to reality either. According to my Netatmo humidity is 65% and temperature is 22.

RE: [Pi IoT] Alarm Clock #07: Sense HAT

DAB — Tue, 28 Jun 2016 18:49:18 GMT

Nice post.

The more I see, the more I like the sense hat board.

DAB